Dear Nik,
i am trying to finalize the build of lcr w/ gsm/sip support
*latest lcr version (in /usr/src/lcr)
*latest openbsc version (in /usr/src/openbsc/openbsc)
*./configure --prefix=/usr/src/lcr/ --with-gsm-bs --with-sip
works ok (with libsofia-sip-ua-dev and libncurses5-dev)
*make does break
gsm_audio.c:20: error: 'gsm' was not expected in this scope
Can you tell what option you gave to configure and how did you organize your
dirs ?
My best,
Xavier.
On Mon, Mar 05, 2012 at 11:39:28AM +0000, Nik Pakar wrote:
Hi Andreas,
Every thing works fine.
Just one last question. I cant find any sample dialplan option towards gsm
and sip interface. tried quite a few didnt worked.
Appreciate if you can just give the last hint how would the dial plan
should looks like towards gsm and sip.
Thanks again.
Nik
On Mon, Mar 5, 2012 at 10:23 AM, Nik Pakar <nikpakar(a)gmail.com> wrote:
> Hi Andreas, extreamlly sorry for the blind question.
>
> I didnt do autogen to create the configure.
>
> Extreamly sorry again.
>
> Rgds
> Nik
>
>
> On Mon, Mar 5, 2012 at 10:19 AM, Nik Pakar <nikpakar(a)gmail.com> wrote:
>
>> Hi Andreas, thousand times thanks for the correct hint.
>>
>> Its indeed crystal clear now.
>>
>> I have tried the git clone from
git://git.osmocom.org/openbsc.git but
>> noticed there is still misdn requirement and also no sip support.
>>
>> Then found from the maillist that i should clone
>> git://git.osmocom.eu/openbsc.git instead of .org which shows sip
>> interfaces on the source.
>>
>> How ever there is no configure file on this source.
>>
>> Am i still checking out from the wrong git ?
>>
>> Once again highly appreciate some light on the final bit.
>>
>> Thanks
>> Nik
>>
>>
>> On Mon, Mar 5, 2012 at 7:44 AM, jolly <andreas(a)eversberg.eu> wrote:
>>
>>> > Do I have to have mISDN for LCR even im not going to use any isdn
>>> > interface ? Im trying to connect the NITB to LCR and LCR to asterisk
>>> > all on ip.
>>> >
>>> > Thanks for any help.
>>> >
>>> > Rgds
>>> > Nik
>>> hi nik,
>>>
>>> you don't need misdn to use lcr with sip and gsm anymore. also you
don't
>>> need any patch. the lcr and openbsc compile out of the box supporting
>>> each other. the howto is a bit outdated.
>>>
>>> try to compile the lcr from the git. don't use chan_lcr, since it still
>>> works with isdn only. you need to setup a sip interface in
>>> interface.conf:
>>>
>>> [sip]
>>> sip <local ip> <remote ip>[:<port>]
>>> sip 10.0.0.12 10.0.0.34
>>> earlyb no
>>> tones no
>>>
>>> use asterisk machine for remote ip. if you have asterisk on the same
>>> machine, change the sip port of asterisk and use "remoteip:port".
>>>
>>> regards,
>>>
>>> andreas
>>>
>>>
>>>
>>
>