Hi Jean-Marc,
On 11/30/23 10:17, jheyrendt.ext(a)orange.com wrote:
Hi
Many many thanks to you, Pau & Neels
Sorry for my unclear questions.
The fact is we want to test to integrate Osmocom with some Ericsson nodes:
MSC, MGW, SGSN
It should be indeed possible to interop with them, it's been done already.
If we understand well, concerning the link between BSC and MSC, an OSMO-STP
is the best solution (link SCCP M3UA / declaration of AS, ASP, RK, CP, ...)
That's the usual approach yes. Whatever should be fine as long as the
Ericsson peer is configured as ASP or SG.
Concerning the CP and UP of the MGW Ericsson and MSC Ericsson, sorry for my
misunderstanding, what do you advice us ?
if we look to the schema, do we need an Osmocom-mgw ? We presume Yes
If Yes, Is it possible to just have one Osmocom-mgw hosted on the
Osmocom-bsc ?
You definetly need an osmo-mgw co-located/used by osmo-bsc.
In this case, There will be RTP traffic between
Osmocom-bts and Osmocom-mgw
(hosted on Osmocom-bsc)
And there will be RTP traffic between Osmocom-mgw (hosted on Osmocom-bsc)
and mgw Ericsson.
And there will be MGCP traffic between Osmocom-mgw (hosted on Osmocom-bsc)
and Osmocom-bsc.
Correct.
In case you are interested, let me remind you that "sysmocom - systems
for mobile communications GmbH" (
https://sysmocom.de) offers commercial
support contracts, in case you require further support for your specific
needs or help with integrating/interoperating against other vendors or
implementing/fixing any features.
Regards,
Pau
--
- Pau Espin Pedrol <pespin(a)sysmocom.de>
http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte