hello
after compiling the new software, bs11_config tells me for bts1 (the
working one):
bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: No Load
Abis-link: Restoring
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number: 001104
BS-11 ESN Hardware Code Number: 135-2044/03.07
BS-11 ESN Firmware Code Number: 135-2044/03.07
PLL Set Value=1006, Work Value=1038
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=1 (Full Slot)
TEI: 25
BS11 Line Interface ATTRIBUTES:
PLL Mode: Standalone
BS11 CCLK ATTRIBUTES:
CCLK Accuracy: High (1)
CCLK Type=0
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
BPORT0 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
BPORT1 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
LMT LOGOFF: ACK
***************************************************************************
i set the bport multi thing on my own
the 2nd bts said this:
bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: No Load
Abis-link: Restoring
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number: 001112
BS-11 ESN Hardware Code Number: 135-2044/03.03
BS-11 ESN Firmware Code Number: 135-2044/03.03
PLL Set Value=1073, Work Value=1073
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=6 (Full Slot)
TEI: 26
BS11 Line Interface ATTRIBUTES:
PLL Mode: Standalone
BS11 CCLK ATTRIBUTES:
CCLK Accuracy: High (1)
CCLK Type=0
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
BPORT0 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
BPORT1 GET ATTR NACK
LMT LOGOFF: ACK
*****************************************************************************
as you can see, i set the port to 0 on both, bts1 works on ts1, tei 25
and bts2 on ts6, tei 26.
does this configuration match with the attached config-file?
unfortunately i couldnt test it thoroghly today, it was late :-(
there is a strange errormessage at the end of bts2 report, a possible
problem? anyway, i wasnt able to create a bport, neither in connected
nor disconnected mode
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!