2 Feb
2018
2 Feb
'18
12:58 p.m.
Dear Harald,
sorry for the authentication matter,
I got the solution now, I need to set encryption to a5 0 on the config.
Thanks for lightneing up before.
btw,
I try to make call but cannot hear the voices. will try this again and
again.
Thanks,
DUO
On Fri, Feb 2, 2018 at 11:30 AM, Sandi Suhendro <djks74(a)gmail.com> wrote:
Dear Harald,
thank you for explanation, I really appreciate it.
So, osmo-hlr now need authentication for connect to the network? so we
cannot attach IMSI without the ki?
if Im not wrong I need to set disable it on the configuration?
location updating reject cause 13
encryption a5 1
authentication optional
on this authentication line need to change? I try do change to
authentication disable, but not work. I believe I have wrong understanding
here.
Im using for 2g network. as far I know only for 3g network you need ki
right?
Hope some feedback. Thank you.
regards,
DUO
On Fri, Feb 2, 2018 at 7:13 AM, Harald Welte <laforge(a)gnumonks.org> wrote:
--
Best Regards,
DUO
Hi!
On Thu, Feb 01, 2018 at 07:14:41PM +0000, Sandi Suhendro wrote:
--
Best Regards,
DUO
20180201190135844 DAUC <0003> hlr.c:79
510106127044410: IMSI known, but
has
no auth data; Returning slightly inaccurate cause
'IMSI Unknown' via
GSUP
the error is quite clear: You have only an IMSI in your HLR, but no
authentication
tokens (key material) for cryptographic authentication.
If at the same time you have configured your network to perform
authentication (i.e.
not explicitly disabled it), then this will of course result in an error.
Either you enter key data in the HLR for your SIM cards, or you disable
authentication.
Does the new osmo-bsc on master cannot use? or
maybe I need to
investigate
more?
The BSC has nothing to do with it. Your error is in OsmoMSC or OsmoHLR
configuration.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================
================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch.
A6)