Thanks a lot for this layer 1 debugging tutorial. It helped me a lot since i was thinking I did something wrong with mISDN. I checked the step 3 and find out that my ISDN card was working fine. Then I tried to invert my twinax plugs and it worked. I think there is a mistake in the wiki. It's written in http://bs11-abis.gnumonks.org/trac/wiki/BS11_Configuration : - left Y01 PCM in (from BSC): RJ45 pin 4,5 - Y02 PCM out (to BSC): RJ45 pin 1,2 but for me it works with : Y01 PCM : RJ45 pin 1,2 (orange / white orange for a straight cable) Y02 PCM : RJ45 pin 4,5 (blue / white blue for a straight cable) I can now see the network on my mobile phone thanks a lot. Best regards Eric Cathelinaud 2009/6/3 Harald Welte <laforge@gnumonks.org>
thanks a lot, andreas.
I hope this helps people debugging their physical connection, cable pin-outs, etc.
Will that patch for the mISDN kernel driver be pushed for mainline (2.6.31)?
It might also help if we had a patch against 2.6.29 that people can apply, rather than building from the mISDN git tree.
-- - Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/
============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)