Hi again,
On Tue, Feb 08, 2011 at 05:54:09PM -0600, Matthew Fredrickson wrote:
One thing I noticed in your sample program is the size
of the frame
you're sending to DAHDI. Try adding 2 to the size parameter when you
write() on the device (assuming you're still using dahdi HDLC).
Also, you must append 2 empty bytes to the frame you write down to the
DAHDI dchan as a placeholder for the CRC.
ok, thanks a lot. I've modified the program accordingly. However, still
no success in getting any response from the RBS2308.
On the other hand, on a RBS2401 this works. As soon as you send something
like one SABME per second on timeslot 1, after a couple of seconds the RBS
will start answering using UA and later I-frames.
Now the only mystery remains about the RBS2308.
And somebody (*hint to the list*) will still have to write a OM2000 BSC-side
implementation, basically what we have with abis_nm is for TS 12.21, but for
the proprietary Ericsson OM2000 protocol (details see my wireshark dissector).
But at least for the 2401 we should have all required information now.
Regards,
Harrald
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)