Dear Experts,
Hello, I am running a gsm system with followings:
OpenBSC version: 0.13.0.319-30e0e
LCR version 1.14
astersik version 1.8.10.1
The system is sited is a busy area. The system works fine for few days but
hangs once the hlr.sqlite3 file size reaches near 12 MB and that causes the
osmo-nitb to take 99% of the cpu usage. I used "./osmo-nitb -m -P -C" to
run the system. The hlr.sqlite3 file increases @2MB/Day. The 'Subscriber'
table of the hlr.sqlite3 file adds a large number of IMSI with
authorized=0. Tables like Counters, Eqipment and EquipmentWatch are filling
up with lots of data. Now the only solution to this problem is to manually
delete the data from the tables.
May I get some light to solve the issue form the experts like you all?
With regards.
[ Content from the openbsc.cfg file is as following:
!
! OpenBSC configuration saved from vty
! !
password foo
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
network
network country code XXX
mobile network code XX
short name Test
long name Test
auth policy closed
location updating reject cause 13
encryption a5 0
neci 1
rrlp mode none
mm info 0
handover 0
handover window rxlev averaging 10
handover window rxqual averaging 1
handover window rxlev neighbor averaging 10
handover power budget interval 6
handover power budget hysteresis 3
handover maximum distance 9999
timer t3101 10
timer t3103 0
timer t3105 0
timer t3107 0
timer t3109 4
timer t3111 1
timer t3113 60
timer t3115 0
timer t3117 0
timer t3119 0
timer t3141 0
bts 0
type sysmobts
band GSMXXX
cell_identity X
location_area_code X
training_sequence_code 7
base_station_id_code 63
ms max power 30
cell reselection hysteresis 4
rxlev access min 0
periodic location update 100
channel allocator ascending
rach tx integer 9
rach max transmission 7
ip.access unit_id XXXX 0
oml ip.access stream_id 255 line 0
gprs mode none
trx 0
rf_locked 0
arfcn XXX
nominal power 23
max_power_red XX
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
timeslot 1
phys_chan_config SDCCH8
timeslot 2
phys_chan_config TCH/F
timeslot 3
phys_chan_config TCH/F
timeslot 4
phys_chan_config TCH/F
timeslot 5
phys_chan_config TCH/F
timeslot 6
phys_chan_config TCH/F
timeslot 7
phys_chan_config TCH/F