OpenBTS with GPRS....trouble with SGSN and PCU

Hello everybody. I was successful in running the calypso BTS by using the openBTS (without gprs). Now I am trying to setup a GPRS N/w with the guide provided at http://wush.net/trac/rangepublic/wiki/GPRS and by using the same Calypso BTS. Want to know whether if this can work out. If not I want to do some minimal implementation (GPRS attach or just activate a PDP context). I followed the tutorial and I am here with logs from PCU and SGSN. LOG from Osmo-PCU # ./osmo-pcu -n 06 -m 234 <0001> pcu_l1_if.cpp:375 BTS available <0001> pcu_l1_if.cpp:91 Sending activate request: trx=0 ts=6 <0001> pcu_l1_if.cpp:502 PDCH: trx=0 ts=6 <0001> pcu_l1_if.cpp:91 Sending activate request: trx=0 ts=7 <0001> pcu_l1_if.cpp:502 PDCH: trx=0 ts=7 <0009> gprs_bssgp_pcu.cpp:508 NS-VC 4 is unblocked. <0008> gprs_bssgp_pcu.cpp:549 Sending reset on BVCI 0 <0008> gprs_bssgp_pcu.cpp:557 Sending reset on BVCI 7 <0008> gprs_bssgp_pcu.cpp:565 Sending unblock on BVCI 7 <0001> pcu_l1_if.cpp:296 RACH request received: sapi=1 qta=1, ra=120, fn=961674 <0002> gprs_rlcmac_data.cpp:1901 Got IMM.ASS confirm, but rest octets do not start with bit sequence 'HH01' (Packet Downlink Assignment) 0002> gprs_rlcmac_data.cpp:564 TBF T3169 timeout during transsmission <0002> gprs_rlcmac_data.cpp:82 - Assignment was on CCCH <0002> gprs_rlcmac_data.cpp:88 - No uplink data received yet <0001> pcu_l1_if.cpp:296 RACH request received: sapi=1 qta=1, ra=124, fn=963005 <0002> gprs_rlcmac_data.cpp:1901 Got IMM.ASS confirm, but rest octets do not start with bit sequence 'HH01' (Packet DownlinkAssignment) 0002> gprs_rlcmac_data.cpp:564 TBF T3169 timeout during transsmission <0002> gprs_rlcmac_data.cpp:82 - Assignment was on CCCH <0002> gprs_rlcmac_data.cpp:88 - No uplink data received yet After a successful GSM attach procedure the phone is accessing the BTS on RACH for a GPRS attach. This set of statements repeats as long as the phone trying to do a GPRS attach send requests on RACH. It seems like the phone BTS receives RACH and a channel is assigned (IMM ASS, I can see this TBF assignment in Wireshark), but I doubt whether this IMM ASS has reached the phone that is trying to GPRS attach. Log from SGSN #./osmo-sgsn <0010> gprs_ns.c:171 NSVCI=65534 Creating NS-VC <0010> gprs_ns.c:171 NSVCI=65535 Creating NS-VC <0010> gprs_ns.c:806 Creating NS-VC for BSS at 192.168.111.144:5948 <0010> gprs_ns.c:679 NSEI=65535 Rx NS RESET (NSVCI=0, cause=O&M intervention) <0010> gprs_ns.c:538 NSEI=8 Tx NS RESET ACK (NSVCI=4) <0010> gprs_ns.c:679 NSEI=4 Rx NS RESET (NSVCI=8, cause=PDU not compatible with protocol state) <0010> gprs_ns.c:538 NSEI=8 Tx NS RESET ACK (NSVCI=4) <0010> gprs_ns.c:865 NSEI=8 Rx NS UNBLOCK <0010> gprs_ns.c:865 NSEI=8 Rx NS UNBLOCK <0011> gprs_bssgp.c:249 BSSGP BVCI=0 Rx RESET cause=O&M intervention <0011> gprs_bssgp.c:249 BSSGP BVCI=7 Rx RESET cause=O&M intervention <0011> gprs_bssgp.c:272 Cell 234-6-1000-0 CI 0 on BVCI 7 <0011> gprs_bssgp.c:344 BSSGP BVCI=7 Rx BVC-UNBLOCK <0011> gprs_bssgp.c:747 BSSGP BVCI=7 Rx Flow Control BVC <0011> gprs_bssgp.c:747 BSSGP BVCI=7 Rx Flow Control BVC and The last statement repeats......... the statement Cell 234-6-1000-0 CI 0 on BVCI 7 The RAI and Cell ID are 0 and 0.... But when I read the code gprs_bssgp.c it says these parameters will be received from BSS. If I set these parameters in OpenBTS.db similar to LAC=RAC but still there is no effect. I am running ./ggsn, ./osmo-sgsn, ./osmo-pcu, ./openbts Is osmo-nitb needed along with SGSN and PCU. I fail to do GPRS attcach in this situation. Can someone please give your comments and guide me with some suggestions. regards, Altaf