Hi Andreas,
Call signalling all works fine right through out from NITB to LCR and out
on SIP. how ever im getting some strange media behaviour.
My setup is,
[MS]---[nano.BTS]---[NITB/LCR]----[SIP Softswitch]
LCR is setup to bridge two interfaces, so what ever comes from gsm goes to
sip and what ever comes from sip goes to gsm.
Now a test call from a mobile to mobile, should go all the way to the
softswitch and come back.
All works fine in terms of signalling.
But in media, LCR seems sending initial SDP to the softswitch as PCMA:8 not
gsm FR.
So softswitch expect the media as PCMA and not transcoding.
Same if the call goes out from softswitch, still no medial as it think
incoming media from LCR is on PCMA.
Any idea about this ?
This is the LCR trace -
http://pastebin.com/5PNKYc5m
This is the sip trace from softswitch -
http://pastebin.com/cVtx1mFB
Rgds
Nik
On Tue, Mar 6, 2012 at 3:38 PM, Nik Pakar <nikpakar(a)gmail.com> wrote:
Hi Andreas, got it working both ways now. Many thanks
for nice work.
I will now test it further with transcoding.
And start on the documentation.
Rgds
Nik
On Tue, Mar 6, 2012 at 12:51 PM, Nik Pakar <nikpakar(a)gmail.com> wrote:
Hi Andreas, i now have calls coming from external
sip->LCR->gsm
But still cant figure out the dial plan to send a call out on sip,
gsm->LCR->sip
I tried,
dialing=072333444 : extern interfaces=sip prefix=072333444
But on LCR trace it shows as below. I think im missing some thing small
here. Appreciate if you can give a little hint.
Thanks
nik
06.03.12 12:40:41.286 EP(1): ACTION (match) action goto line 11
06.03.12 12:40:41.286 EP(1): ACTION goto/menu (change to) ruleset extern
dialing 072333444
06.03.12 12:40:41.286 EP(1): ACTION (match) action extern line 28
06.03.12 12:40:41.286 EP(1): ACTION extern (calling) number 072333444
interfaces sip
06.03.12 12:40:41.287 EP(1): SETUP ACKNOWLEDGE to CH(1)
06.03.12 12:40:41.287 EP(2): CHANNEL SELECTION (found given interface)
interface sip
06.03.12 12:40:41.287 EP(2): INTERFACE (has no function) interface�@
06.03.12 12:40:41.287 EP(2): INTERFACE (no free ports found)
06.03.12 12:40:41.287 EP(1): TONE to CH(1) directory default name
cause_22
06.03.12 12:40:41.287 EP(1): DISCONNECT to CH(1) cause value=34
location=1-Local-PBX
06.03.12 12:40:41.287 CH(1): MNCC_DISC_REQ LCR<->BSC progress coding=3
location=1 descr=8 cause coding=3 location=1 value=34
06.03.12 12:40:56.246 CH(1): MNCC_REL_IND LCR<->BSC cause coding=3
location=0 value=16
06.03.12 12:40:56.247 EP(1): RELEASE from CH(1) cause value=16
location=0-User
06.03.12 12:40:56.247 EP(1): ACTION hangup
On Tue, Mar 6, 2012 at 7:44 AM, Nik Pakar <nikpakar(a)gmail.com> wrote:
Hi Andreas,
It was apperently compiled on my debian while i had misdn libs
isntalled. Now im trying on a fresh debian from the same set of sources
which i got it working and without misdn, it fails to compile gsm.
Attached is my config output and compile break.
http://pastebin.com/W6UHn4Lc
So should i still install misdn even though its not used.
Rgds
Nik
On Mon, Mar 5, 2012 at 10:05 AM, Andreas Eversberg <andreas(a)eversberg.eu
wrote:
Alexander Chemeris wrote:
> Does it mean that that now we can use LCR with other SIP
> softswitches/PBX'es, like Freeswitch? I do not follow LCR development
> closely, but that would be a very interesting development.
>
yes, this was my intention. gsm and sip interface of lcr will not rely
on misdn anymore. currently i don't support audio transfer via chan_lcr,
so chan_lcr will only work with isdn interfaces. the sip interface
implementation has not much options, so it can only do sipmple
point-to-point sip connections to a gateway or endpoint.