[RFC] rework location update request

Hi, recently my modem with an already known SIM got a location update reject, because the procedure timed out. So I looked more into the location updates. How openbsc location update works: MS Network LOC REQ -> <- Identity Req IMSI Identity Resp IMSI -> <- Identity Req IMEI Identity Resp IMEI -> <- LOC ACCEPT OpenBSC is using a Timeout (5 sec) for the completion of location update. So let's say we trigger for unknown reason the timeout (e.g. RF problem). MS Network LOC REQ -> <- Identity Req IMSI (No response) <- LOC Reject! cause 13 / No roaming allowed. If the MS receive it, it will put our network on it's blacklist and won't try it again until power cycled. We could change reject cause to something different [1], but we might want to reject foreign SIMs not to try our network again. The problem here is that openBSC use the same configuration to reject unknown SIMs as well for timeouts. But I think this timeout should be removed. 04.08 doesn't describe a timeout on location update request on network side. But it describes other timeouts: 04.08 describes: - T3260 auth req. sent, wait until response (12 sec) - T3270 identity req. sent, wait until response (12 sec) I think we should implement both timers and drop the RR connection if it fires. I'm unsure if it's needed: But OpenBSC could count un-successful location update req. Reset counter if it's succeeded. After a certain amount of failures we send a location update reject. (unsure which cause) best, lynxis Related Specs: GSM 04.08 [1] Chapter 4.4 describing location update GSM 04.08 [1] Chapter 11.2 Timers GSM 04.08 [1] Chapter Annex G Reject Causes [0] nitb.cfg: network: location updating reject cause [1] ETSI TS 100 940 -- Alexander Couzens mail: lynxis(a)fe80.eu jabber: lynxis(a)fe80.eu mobile: +4915123277221 gpg: 390D CF78 8BF9 AA50 4F8F F1E2 C29E 9DA6 A0DF 8604