5 Feb
2011
5 Feb
'11
10:28 p.m.
Thanks so much for doing this! Sorry about not merging it myself, I
never ended up purchasing equipment for myself to test with and so I
have not had as much time and opportunity as I had hoped I would to do
this.
If there are any questions I can answer to assist, I would be glad to
do so. Thanks for taking up my orphaned branch and merging it back
in.
Hope all is well with you.
Matthew Fredrickson
On Sat, Feb 5, 2011 at 1:35 PM, Harald Welte <laforge(a)gnumonks.org> wrote:
Hi!
Today I've been working on improving + cleaning up the DAHDI work that
had been done last year by Xavier Carcelle and Matthew Fredrickson, which in
turn uses some simplistic LAPD implementation by Oystein Homelien.
It now seems to be working fine, at least for my TE110P card and a BS-11
in 2-TRX configuration. Haven't tried multi-drop yet.
All you need to do is to
* make sure your dahdi/user.h is found in the include path
* build openbsc
* configure your /etc/dahdi/system.conf according to your T1/E1 physical
setup
* check that dahdi_tool shows no Alarms for the physical line
* use e.g. openbsc.cfg.1-1 as sample and change 'e1_line 0 driver misdn' to
'e1_line 0 driver dahdi'
Regards,
Harald
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)