Hi Tom and others,
in our testing setup, we have sporadic failures (~2 out of 10 times) with:
DOML <0001> bts.c:208 Shutting down BTS 0, Reason No clock from osmo-trx
What would be possible reasons for this failure, and how can we go about fixing
it? Some more logging around it:
20170614032014399 DRSL <0000> rsl.c:2333 (bts=0,trx=0,ts=0,ss=2) Fwd RLL msg
EST_IND from LAPDm to A-bis
20170614032018533 DL1C <0006> scheduler_trx.c:1451 PC clock skew: elapsed uS
4136730
20170614032018533 DOML <0001> bts.c:208 Shutting down BTS 0, Reason No clock from
osmo-trx
20170614032018533 DL1C <0006> scheduler.c:240 Exit scheduler for trx=0
20170614032018533 DL1C <0006> scheduler.c:216 Init scheduler for trx=0
20170614032018533 DOML <0001> oml.c:280 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL
STATE OK -> Off line
[...]
Shutdown timer expired
(We're using an external 10MHz OCXO timing source)
It appears there's four seconds of nothing from osmo-trx?
Most curious is that the next run will be completely fine, until some time
later we get this same failure.
We wait until osmo-trx logs
-- Transceiver active with 1 channel(s)
and then we "immediately" or up to a second later launch osmo-bts-trx. Would it
help to give it more grace time??
Thanks!
~N