14 Dec
2020
14 Dec
'20
9:11 p.m.
Dear Team please help me with the following question:
I want to set up following parameters in osmobsc config:
cell bar quality
cell reselection offset
temporary offset
penalty time
cell reselection hysterisis
These parameter play role when a MS should reselect another cell.
These parameters do appear in OsmoBSC(config-net-bts) and i do set up them.
But when i run «show running-config» only hysterisis is present… the rest have gone ….
also gsmtap from wireshark does not show the rest of parameters.
Pls help if you can ….
Pls find the log from OsmoBSC(config-net-bts)# show running-config:
OsmoBSC(config-net-bts)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 0
logging print category-hex 1
logging print category 0
logging timestamp 0
logging print file 1
logging level rll notice
logging level mm notice
logging level rr notice
logging level rsl notice
logging level nm info
logging level pag notice
logging level meas notice
logging level msc notice
logging level ho notice
logging level hodec notice
logging level ref notice
logging level nat notice
logging level ctrl notice
logging level filter debug
logging level pcu debug
logging level lcls notice
logging level chan notice
logging level ts notice
logging level as notice
logging level cbs notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
!
stats interval 5
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
no e1_line 0 keepalive
cs7 instance 0
point-code 0.23.3
network
network country code 1
mobile network code 1
encryption a5 0
neci 1
paging any use tch 0
handover 0
handover algorithm 1
handover1 window rxlev averaging 10
handover1 window rxqual averaging 1
handover1 window rxlev neighbor averaging 10
handover1 power budget interval 6
handover1 power budget hysteresis 3
handover1 maximum distance 9999
dyn_ts_allow_tch_f 0
bts 0
type sysmobts
band GSM900
cell_identity 6969
location_area_code 1
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
radio-link-timeout 32
channel allocator ascending
rach tx integer 9
rach max transmission 7
channel-description attach 1
channel-description bs-pa-mfrms 5
channel-description bs-ag-blks-res 1
no access-control-class-ramping
access-control-class-ramping-step-interval dynamic
access-control-class-ramping-step-size 1
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ipa unit-id 6969 0
oml ipa stream-id 255 line 0
neighbor-list mode automatic
codec-support fr
amr tch-f modes 0 2 4 7
amr tch-f threshold ms 32 32 32
amr tch-f hysteresis ms 8 8 8
amr tch-f threshold bts 32 32 32
amr tch-f hysteresis bts 8 8 8
amr tch-f start-mode auto
amr tch-h modes 0 2 4
amr tch-h threshold ms 32 32
amr tch-h hysteresis ms 8 8
amr tch-h threshold bts 32 32
amr tch-h hysteresis bts 8 8
amr tch-h start-mode auto
gprs mode none
trx 0
rf_locked 0
arfcn 10
nominal power 26
max_power_red 16
rsl e1 tei 0
timeslot 0
phys_chan_config CCCH+SDCCH4
hopping enabled 0
timeslot 1
phys_chan_config TCH/F
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
ip.access rtp-base 4000
no bsc-welcome-text
no bsc-msc-lost-text
no bsc-grace-text
codec-list fr1 hr1 fr2 fr3 hr3
type normal
allow-emergency allow
amr-config 12_2k forbidden
amr-config 10_2k forbidden
amr-config 7_95k forbidden
amr-config 7_40k forbidden
amr-config 6_70k forbidden
amr-config 5_90k allowed
amr-config 5_15k forbidden
amr-config 4_75k forbidden
amr-payload octet-aligned
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
mgw local-port 2727
mgw remote-ip 127.0.0.1
mgw remote-port 2427
bsc
mid-call-timeout 0
no missing-msc-text
cbc
no remote-ip
no listen-port
end
OsmoBSC(config-net-bts)#
--
Mario Lucas