Ah, yes. They came through. Let me try'em. Thanks.
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 5:58 PM
To: op25-dev(a)yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Trunktracker,
I sent you all the configuration files you needed to start monitoring Hillsborough County
earlier today via private email. Did you not get them?
Your HillsboroughWest.tsv file shown below is a “Tag” file that associates system
talkgroups with a name or tag. This file gets called from inside of trunk.tsv or
whatever you
want to name it as long as your call it with the -T xxxx.tsv from your rx.py command
line.
Let me know if you haven’t receive the files I sent.
There were: hills.sh
hills.tsv
hills-tgids.tsv
Bill
From: op25-dev(a)yahoogroups.com <op25-dev(a)yahoogroups.com>
Sent: Saturday, December 1, 2018 4:49 PM
To: op25-dev(a)yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Thanks. I've gone ahead and built a file called HillsboroughWest.tsv for this system
https://www.radioreference.com/apps/db/?sid=7236:
(I actually took one of the existing files that come with op25 and just edited it.) If I
run the command line:
../rx.py --args 'airspy' -S 3000000 -N 'LNA:15,MIX:15,IF:15' -f
769.80625e6 -T HillsboroughWest.tsv -q 0 -2 -w -U 2> stderr.2
The program doesn't start up and I get this:
The stderr..2 file shows this:
If I try using one of the other files that come with OP25 like ontario.tsv or nyseg.tsv in
the command line instead, it behaves the same way.
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 5:29 PM
To: op25-dev(a)yahoogroups.com
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
I meant 16, not 17
On Sat, Dec 1, 2018, 4:27 PM Ryan Schilder <rjschilder(a)gmail.com wrote:
0x denotes hexadecimal format. 0x00A should be equal to 0xA.
10 decimal is 10, 0x10 is 17 decimal.
On Sat, Dec 1, 2018, 4:25 PM 'Trunk Tracker' trunktracker(a)tampabay.rr.com
[op25-dev] <op25-dev(a)yahoogroups.com wrote:
I'm working on the trunk.tsv file. If the NAC is A, then should this be entered in
trunk.tsv as 0xA, 0xa, or 0x00a? And what is the "0x" part for?
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 5:16 PM
To: op25-dev(a)yahoogroups.com
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Yay! You're off to the races! Now you can compose your trunk.tsv file and use that, so
you don't need to start trunking manually... and you can define blacklists and
whitelists for your talkgroups of interest, etc.
Enjoy!
~iain
On Sat, Dec 1, 2018 at 2:00 PM 'Trunk Tracker' trunktracker(a)tampabay.rr.com
[op25-dev] <op25-dev(a)yahoogroups.com> wrote:
Typing t while it's running now makes it play the audio. So now I'm hearing
transmissions! Yes!! This is exciting...
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 4:39 PM
To: op25-dev(a)yahoogroups.com <mailto:op25-dev@yahoogroups..com>
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Great! So now you need to get trunking working. If you're using a recent pull of
boatbod's code, you can type 't' when op25 is running, so start trunking.
Otherwise you need to compose a trunk.tsv for your system and pass that with the
'-T' option on the command-line....
~iain
On Sat, Dec 1, 2018 at 1:36 PM 'Trunk Tracker' trunktracker(a)tampabay.rr.com
[op25-dev] <op25-dev(a)yahoogroups.com> wrote:
Yes, that worked and I did hear some audio now. A female voice saying "front,
center".
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 4:32 PM
To: op25-dev(a)yahoogroups.com
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
On Sat, Dec 1, 2018 at 1:30 PM 'Trunk Tracker' trunktracker(a)tampabay.rr.com
<mailto:trunktracker@tampabay..rr.com> [op25-dev] <op25-dev(a)yahoogroups.com>
wrote:
When I run aplay/usr/share/sounds/alsa/Front_Center.wav, I don't hear anything and I
get this:
You need a space after "aplay" - aplay is the command, and the reset is the path
to the wav file to play.
~iain