In that case, I'll start working on the .tsv's and will change to -T. This is
making progress though and I appreciate all the help.
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Saturday, December 01, 2018 8:06 AM
To: op25-dev(a)yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Ah yes. I am not sure that you can get audio with the -t specified instead of using -T
trunk.tsv on the rx.py command line. The intent of having him use -t for initial startup
was to determine the NAC of his system ,and to eliminate any possibilities incorrect
formatting of the trunk.tsv file from preventing op25 from running. Time now to add
trunk.tsv to the mix now that op25 will start up and run.
Bill
From: op25-dev(a)yahoogroups.com <op25-dev(a)yahoogroups.com>
Sent: Friday, November 30, 2018 9:38 PM
To: op25-dev(a)yahoogroups.com
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
On Fri, Nov 30, 2018 at 7:28 PM wllmbecks(a)gmail.com [op25-dev]
<op25-dev(a)yahoogroups.com> wrote:
You’re not going to get any audio from the speakers
with the -w option specified as this is telling op25 to output udp packets.. Drop the -w
and replace with -V per the following.
./rx.py --args 'airspy' -S 3000000 -N 'LNA:15,MIX:15,IF:15' -f
769.80625e6 -t -q 0 -2 -V -U 2> stderr.2
I have both -w -and -U in mine, and it outputs audio. -w is probably
not necessary, but I don't think it hurts anything.
Not sure about -t - it's labeled "use experimental tone detect
algorithm" - I'm not using that.
~iain
From: op25-dev(a)yahoogroups.com
<op25-dev(a)yahoogroups.com>
Sent: Friday, November 30, 2018 7:14 PM
To: op25-dev(a)yahoogroups.com
Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
Thanks, found it. It's called "Ubuntu 18.04.1 LTS.vmx". So I went ahead and
added this line to it and saved it:
usb.quirks.device0 = "0x1d50:0x60a1 skip-reset, skip-refresh, skip-setconfig"
Hillsborough County is actually a mixture of Phase I & II. Now when I run this line:
./rx.py --args 'airspy' -S 3000000 -N 'LNA:15,MIX:15,IF:15' -f
769.80625e6 -t -q 0 -2 -w -U 2> stderr.2
I get this:
But I don't hear any audio out the speakers. I did a speaker test in the sound
settings in Ubuntu and it's working fine on left and right. So it looks like this is
coming along, but still can't hear anything.
trunktracker(a)tampabay.rr.com
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Friday, November 30, 2018 8:00 PM
To: op25-dev@yahoogroups..com <mailto:op25-dev@yahoogroups.com>
Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From
Scratch
On 11/30/18 18:46, 'Trunk Tracker' trunktracker(a)tampabay.rr.com
[op25-dev] wrote:
*So now I'm looking at all this and don't know where this "* *VMWare
Virtual Machine Configuration file" is. Where do we find this file?
You are looking for a file named ____.vmx where ____ is probably the
name of your virtual machine. The .vmx file is typically located in the
directory where you created the virtual machine. You can edit it with
Notepad.
--
Apu