you have the source dir for gr-fsk4 - good. Use the cd command the chdir to that dir
(src/gr-fsk4) and then do
sh bootstrap
./configure
make
make install
Max
________________________________
From: Robert Klamp Jr. <RobertKlamp(a)aol.com>
To: op25-dev(a)yahoogroups.com
Sent: Tuesday, January 29, 2013 9:10 AM
Subject: RE: [op25-dev] OP25 and WireShark Help
I have what is supposed to be a working copy on a thumb drive I copy the SRC file over to
my Home folder. The SCR folder contains 4 folders GNURadio-3.2.2, GR-FSK4, OP25, and OLD I
can post a link to it if it will help. I then open a terminal and run the command lines to
start it: cd ~/src/op25/python-à./audio_p25_rx.py –a and I get this errorà
bob@ubuntu:~$ cd ~/src/op25/python
bob@ubuntu:~/src/op25/python$ ./audio_p25_rx.py -a
Traceback (most recent call last):
File "./audio_p25_rx.py", line 34, in <module>
from gnuradio import audio, eng_notation, fsk4, gr, gru, op25
ImportError: cannot import name fsk4
bob@ubuntu:~/src/op25/python$
bob@ubuntu:~/src/op25/python$
I will try and install from scratch but I get the same error plus a few others, any way
any help is appreciated and please let me know if you need more info. As for the system I
am running Ubuntu 10.04 with VMware player on a windows 7 64 bit machine with a AMD
processor.
Thanks Again,
Bob
From:op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf Of ikjtel
Sent: Tuesday, January 29, 2013 7:46 AM
To: op25-dev(a)yahoogroups.com
Subject: Re: [op25-dev] OP25 and WireShark Help
Robert
Not a lot of info here to go on.
We'd need you to post the specific error messages you're receiving - otherwise it
won't be possible to arrive at a diagnosis.
Max
________________________________
From:rbrtklamp <RobertKlamp(a)aol.com>
To: op25-dev(a)yahoogroups.com
Sent: Tuesday, January 29, 2013 5:13 AM
Subject: [op25-dev] OP25 and WireShark Help
Has anybody had any luck getting OP25 to work. I have been going crazy trying to get this
program installed and running but it always gives me errors. I have tried ubuntu 9.10 but
they no longer release or update any packages for that version anymore. So now I am on to
Ubuntu 10.04 GNUradio installs fine but I get a ton of errors when trying to install OP25.
My end game is to be able to use OP25 with wire shark to review the data packets. Right
now I am at a loss, I am not very Linux literate and really have a almost no knowledge on
how the operating system works. I should add I installed and use DSD just fine, thats why
this op25 thing is driving me crazy I follow every part of the building instructions to
the T and still get errors and missing pieces. I am at the point that I am willing to pay
somebody for their time if someone would be kind enough to contact me directly I will give
you my phone number and we can go from there. Just let me know what I
owe you for your time and I will paypal it over to you. Bottom line is I NEED to get this
program up and running with wire shark for a project me and some Friends are working on.
Any help would be very much appreciated and I am more than happy to compensate any for
their time if somebodies willing to walk me through the set-up and figure out why I cant
get it running. PLEASE HELP! Any one interested can contact me here directly at the email
address below.
Thank you all for your time,
Robert Klamp
RobertKlamp at Comcast dot net