Hi Mel
There are a couple of things going on here. In your trunk.tsv file, your control channel
frequency format is incorrect. You don't need to use scientific notation for those
entries, so remove the "e6". You are also specifying an offset of 1500, 15000
would be a better choice here. I don't recall the filter width of the demodulator, but
you are trying to keep the DC spike out of the channel bandwidth. Maybe 20000 for the
offset?
In your cincy.tsv file, there is an extra line at the very end, which would throw an
error upon parsing that file. The last line needs to be valid talkgroup information. i.e.
"59030 Emergency Management Agency" should be the very last line.
./scope.py --args 'rtl=0' -f 851.18750e6 -N 'LNA:40' -V -v 0 -S 960000 -q
39 -T trunk.tsv
Try using that command line instead of the one you're using. The LNA gain of 49 is a
bit much, and you're probably overloading the signal a bit. The sample rate of 288000
is also not very efficient, 960000 is a much better option. I didn't see any TDMA
talkgroups on that system you're monitoring, so the '-2' isn't necessary
here.
-Scott