Ah, I wasn't aware of that. I've been using Linux Mint (currently 18.1) which is
Ubuntu-based and works well. One challenge with straight Debian is how slowly updates
filter through the system. Mint, I think, is usually a bit more current than even
Ubuntu.
But there is a separate issue at the moment with rtlsdr installed via build-gnuradio.
I'm hoping that will be resolved soon.
John
On Jun 28, 2017, 6:06 PM, at 6:06 PM, "Brett Friermood brett.friermood(a)gmail.com
[op25-dev]" <op25-dev(a)yahoogroups.com> wrote:
Unfortunately, OP25 doesn't run on Debian without
making (drastic?)
changes, and is why only Ubuntu 14.04 is "officially" supported. I also
prefer Debian, and ended up adding a full second hard drive (actually
SSD)
to the machine in question to dual boot Ubuntu to be able to run OP25.
I ran into the same or similar error as you, and I believe I determined
OP25 needs a newer version of WxWidgets than could be installed in
Debian.
Brett
On Wed, Jun 28, 2017 at 4:52 PM, kb9mwr(a)yahoo.com [op25-dev] <
op25-dev(a)yahoogroups.com> wrote:
I wish that build-gnuradio script worked for Debian 8. I spent the
whole
evening yesterday installing gnuradio and op25 on
a raspberry pi.
Looked
like everything was good, till I fired up the
scope tool:
./scope.py --args rtl=0 -f 772.63125 -g 65 -o 17 -N LNA:35 -V -v -S
250000
-q 51
attempts to launch, but dies
Something about "recreating status bar in wxFrame " . which is some
sort
of wxWidgets error.
---In op25-dev(a)yahoogroups.com, <jra@...> wrote :
Thanks, flkmrz! I recently posted something similar on my blog
(
https://blog.febo.com) and I'm going to edit those posts based on
some
of what you've said below.
I strongly prefer using the "build-gnuradio" script
(
http://sbrac.org/files/build-gnuradio) to build the system from
sources. It requires very little user intervention, makes sure you
have
all the required .deb or .rpm packages installed,
and gives you the
latest version of the code base. But as of right now (28 June 2017)
the
rtlsdr components don't build properly due to
upstream code changes.
I
have a good feeling that it will be fixed very
soon, but over the
last
> week I've been tearing my hair out.
>
>
>
>
>