So, what this " chmod +x hills.sh"? Do I type that somewhere? trunktracker@tampabay.rr.com From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Saturday, December 01, 2018 6:21 PM To: op25-dev@yahoogroups.com Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch Don’t forget the chmod +x hills.sh before trying to execute it. Bill From: op25-dev@yahoogroups.com <op25-dev@yahoogroups.com> Sent: Saturday, December 1, 2018 5:04 PM To: op25-dev@yahoogroups.com Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch Ah, yes. They came through. Let me try'em. Thanks. trunktracker@tampabay.rr.com From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Saturday, December 01, 2018 5:58 PM To: op25-dev@yahoogroups.com Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch Trunktracker, I sent you all the configuration files you needed to start monitoring Hillsborough County earlier today via private email. Did you not get them? Your HillsboroughWest.tsv file shown below is a “Tag” file that associates system talkgroups with a name or tag. This file gets called from inside of trunk.tsv or whatever you want to name it as long as your call it with the -T xxxx.tsv from your rx.py command line. Let me know if you haven’t receive the files I sent. There were: hills.sh hills.tsv hills-tgids.tsv Bill From: op25-dev@yahoogroups.com <op25-dev@yahoogroups.com> Sent: Saturday, December 1, 2018 4:49 PM To: op25-dev@yahoogroups.com Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch