Graham
That was it. Thanks so much for your time and work on this project.
Bill, WA8WG
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Sunday, September 24, 2017 8:14 PM
To: op25-dev(a)yahoogroups.com
Subject: RE: [op25-dev] Re: Raspbian Jessie Stretch Lite
Bill,
The "buzz" is most likely because your rx.py has been configured to send
wireshark (UDP) data but the vocoder hasn't been turned on with the "-V"
option. Check and/or post your command line options.
Here are mine. Obviously some are specific to my setup, but everything after "-S
960000" should be good for you too
./rx.py --args "rtl=0" --gains 'lna:36' -f 773.84375e6 -S 960000 -T
trunk.tsv -q 0 -V -2 -U 2> stderr.2