No go. Still the same error using both the "-A" and "-a" arguments for audio input. With no SDR plugged in, or any audio arguments, I get the expected "FATAL: No supported devices found to pick from." warning but also still get the GUI error lines showing up afterward. On Tue, Jan 31, 2017 at 9:45 PM, Sean Kealy superstardodge@yahoo.com [op25-dev] <op25-dev@yahoogroups.com> wrote:
Almost seems like it doesn't like your RTL , try running scope with the if or disc tap command and see if it comes up
-------------------------------------------- On Tue, 1/31/17, Brett Friermood brett.friermood@gmail.com [op25-dev] < op25-dev@yahoogroups.com> wrote:
Subject: Re: [op25-dev] Unable to Run scope.py To: op25-dev@yahoogroups.com Received: Tuesday, January 31, 2017, 6:41 PM
I did. "sudo rmmod dvb_usb_rtl28xxu" outputs "rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded"
This was a fresh install of OP25 on this computer. I am able to run osmocom_fft without issue.
On Tue, Jan 31, 2017 at 8:19 PM, Sean Kealy superstardodge@yahoo.com [op25-dev] <op25-dev@yahoogroups.com> wrote:
Did you do the remove
modprobe command?
On Tuesday, January
31, 2017 2:18 PM, "Brett Friermood
brett.friermood@gmail.com [op25-dev]" <op25-dev@yahoogroups.com> wrote:
I may have
misinterpreted your question thinking you were asking if the
error comes up rather than asking if the GUI comes up.
If I run scope.py without any arguments I still get the same error. Any manner of command line arguments produces the same error.
On Sun, Jan 29, 2017 at 10:27 AM, Sean Kealy superstardodge@yahoo.com [op25-dev] <op25-dev@yahoogroups.com> wrote:
If u run just ./scope.py does it come up
------------------------------ --------------
On Sat, 1/28/17, Brett Friermood brett.friermood@gmail.com [op25-dev] < op25-dev@yahoogroups.com> wrote:
Subject: [op25-dev] Unable to Run scope.py To: op25-dev@yahoogroups.com Received: Saturday, January 28, 2017, 2:06 PM
BretJust built OP25 on Debian Jessie without issue. However when I try to run a simple scope command it fails with the following error:
Traceback (most recent call last): File "./scope.py", line 2751, in <module> app = stdgui2.stdapp(p25_rx_block,
"APCO P25 Receiver", 3)
File
"/usr/lib/python2.7/dist- packages/gnuradio/wxgui/ stdgui2.py", line 46, in __init__
wx.App.__init__ (self, redirect=False)
File "/usr/lib/python2.7/dist-
packages/wx-3.0-gtk2/wx/_core. py",
line 8628, in __init__
self._BootstrapApp()
File "/usr/lib/python2.7/dist- packages/wx-3.0-gtk2/wx/_core. py", line 8196, in _BootstrapApp return _core_.PyApp__BootstrapApp(* args,
**kwargs)
File "/usr/lib/python2.7/dist- packages/gnuradio/wxgui/ stdgui2.py", line 49, in OnInit
frame = stdframe (self.top_block_maker, self.title, self._nstatus)
File
"/usr/lib/python2.7/dist- packages/gnuradio/wxgui/ stdgui2.py", line 76, in __init__
self.panel = stdpanel (self, self, top_block_maker)
File
"/usr/lib/python2.7/dist- packages/gnuradio/wxgui/ stdgui2.py",
line 98, in __init__
self.top_block = top_block_maker (frame, self, vbox, sys.argv) File "./scope.py", line 212, in __init__
self.__init_gui(frame, panel, vbox)
File
"./scope.py", line 466, in __init_gui
self.frame.CreateStatusBar()
File
"/usr/lib/python2.7/dist- packages/wx-3.0-gtk2/wx/_ windows.py", line 615, in CreateStatusBar return _windows_.Frame_ CreateStatusBar(*args, **kwargs) wx._core.PyAssertionError: C++ assertion
"!m_frameStatusBar" failed at
../src/common/framecmn.cpp( 381) in
CreateStatusBar(): recreating status bar in wxFrame
The command I am running is simply "./scope.py -f 152.5925e6". Other references to this error that I have been able to find appeared to all be resolved by adding or properly formatting the NAC in the trunk.tsv file. Scope.py properly finds the SDR dongle, and will set the gain if I provide the argument, but always fails with this error and never opens the GUI. I'm sure I'm missing something simple.
Thanks,
Brett
------------------------------ ------
Posted by: Sean Kealy <superstardodge@yahoo.com>
------------------------------ ------
------------------------------ ------
Yahoo Groups Links
(Yahoo! ID required)
<op25-dev-fullfeatured@yahoogroups.com>
------------------------------------ Posted by: Sean Kealy <superstardodge@yahoo.com> ------------------------------------
------------------------------------
Yahoo Groups Links