Build failed in Jenkins: nplab-m3ua-test #3416

See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/3416/display/redirect> Changes: ------------------------------------------ [...truncated 464.86 KiB...] #19 11.76 Downloading sphinx-9.2.0-py3-none-any.whl.metadata (5.9 kB) #19 11.81 Collecting sphinxcontrib-napoleon #19 11.82 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl.metadata (6.2 kB) #19 11.88 Collecting pyscard (from -r /tmp/pysim_requirements.txt (line 1)) #19 11.89 Downloading pyscard-2.3.2.tar.gz (162 kB) #19 11.95 Installing build dependencies: started #19 12.55 Installing build dependencies: finished with status 'done' #19 12.55 Getting requirements to build wheel: started #19 12.74 Getting requirements to build wheel: finished with status 'done' #19 12.74 Preparing metadata (pyproject.toml): started #19 12.84 Preparing metadata (pyproject.toml): finished with status 'done' #19 12.86 Collecting pyserial (from -r /tmp/pysim_requirements.txt (line 2)) #19 12.87 Downloading pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) #19 13.00 Collecting pytlv (from -r /tmp/pysim_requirements.txt (line 3)) #19 13.01 Downloading pytlv-0.71.tar.gz (15 kB) #19 13.04 Preparing metadata (setup.py): started #19 13.14 Preparing metadata (setup.py): finished with status 'done' #19 13.19 Collecting cmd2<4.0,>=2.6.2 (from -r /tmp/pysim_requirements.txt (line 4)) #19 13.20 Downloading cmd2-3.5.1-py3-none-any.whl.metadata (16 kB) #19 13.25 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) #19 13.25 Downloading jsonpath_ng-1.14.0-py3-none-any.whl.metadata (17 kB) #19 13.31 Collecting construct>=2.10.70 (from -r /tmp/pysim_requirements.txt (line 6)) #19 13.32 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) #19 13.38 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) #19 13.39 Downloading bidict-0.24.1-py3-none-any.whl.metadata (8.7 kB) #19 13.53 Collecting pyosmocom>=0.0.12 (from -r /tmp/pysim_requirements.txt (line 8)) #19 13.54 Downloading pyosmocom-0.0.12-py3-none-any.whl.metadata (1.4 kB) #19 13.56 Requirement already satisfied: pyyaml>=5.4 in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 9)) (6.0.2) #19 13.59 Collecting termcolor (from -r /tmp/pysim_requirements.txt (line 10)) #19 13.60 Downloading termcolor-3.3.0-py3-none-any.whl.metadata (6.5 kB) #19 13.66 Collecting colorlog (from -r /tmp/pysim_requirements.txt (line 11)) #19 13.66 Downloading colorlog-6.12.0-py3-none-any.whl.metadata (11 kB) #19 13.76 Collecting pycryptodomex (from -r /tmp/pysim_requirements.txt (line 12)) #19 13.76 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (3.4 kB) #19 13.89 Collecting cryptography (from -r /tmp/pysim_requirements.txt (line 13)) #19 13.90 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (4.4 kB) #19 13.91 Requirement already satisfied: packaging in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 15)) (25.0) #19 13.94 Collecting six (from smpplib==2.1.0) #19 13.95 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) #19 14.00 Collecting pyparsing>=3.0.6 (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #19 14.01 Downloading pyparsing-3.3.3-py3-none-any.whl.metadata (5.9 kB) #19 14.09 Collecting bitstruct (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #19 14.09 Downloading bitstruct-8.24.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (7.3 kB) #19 14.15 Collecting Twisted~=23.10.0 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.16 Downloading twisted-23.10.0-py3-none-any.whl.metadata (9.5 kB) #19 14.31 Collecting smpp.pdu3~=0.4 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.33 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl.metadata (929 bytes) #19 14.38 Collecting pyperclip>=1.8.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 14.39 Downloading pyperclip-1.11.0-py3-none-any.whl.metadata (2.4 kB) #19 14.46 Collecting rich>=15.0.0 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 14.46 Downloading rich-15.0.0-py3-none-any.whl.metadata (18 kB) #19 14.51 Collecting rich-argparse>=1.7.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 14.52 Downloading rich_argparse-1.8.0-py3-none-any.whl.metadata (15 kB) #19 14.58 Collecting attrs>=21.3.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.58 Downloading attrs-26.1.0-py3-none-any.whl.metadata (8.8 kB) #19 14.63 Collecting automat>=0.8.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.64 Downloading automat-25.4.16-py3-none-any.whl.metadata (8.4 kB) #19 14.69 Collecting constantly>=15.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.70 Downloading constantly-23.10.4-py3-none-any.whl.metadata (1.8 kB) #19 14.76 Collecting hyperlink>=17.1.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.77 Downloading hyperlink-21.0.0-py2.py3-none-any.whl.metadata (1.5 kB) #19 14.82 Collecting incremental>=22.10.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.83 Downloading incremental-24.11.0-py3-none-any.whl.metadata (9.5 kB) #19 14.86 Requirement already satisfied: typing-extensions>=4.2.0 in /usr/lib/python3/dist-packages (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) (4.13.2) #19 14.94 Collecting zope-interface>=5 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.95 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl.metadata (48 kB) #19 14.99 Collecting sphinxcontrib-applehelp>=1.0.7 (from sphinx) #19 15.00 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 15.05 Collecting sphinxcontrib-devhelp>=1.0.6 (from sphinx) #19 15.06 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 15.11 Collecting sphinxcontrib-htmlhelp>=2.0.6 (from sphinx) #19 15.12 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl.metadata (2.3 kB) #19 15.17 Collecting sphinxcontrib-jsmath>=1.0.1 (from sphinx) #19 15.18 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl.metadata (2.6 kB) #19 15.23 Collecting sphinxcontrib-qthelp>=1.0.6 (from sphinx) #19 15.24 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 15.30 Collecting sphinxcontrib-serializinghtml>=1.1.9 (from sphinx) #19 15.31 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl.metadata (2.4 kB) #19 15.36 Collecting Jinja2>=3.1 (from sphinx) #19 15.37 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) #19 15.42 Collecting Pygments>=2.19 (from sphinx) #19 15.43 Downloading pygments-2.21.0-py3-none-any.whl.metadata (2.5 kB) #19 15.45 Requirement already satisfied: docutils<0.24,>=0.21 in /usr/lib/python3/dist-packages (from sphinx) (0.21.2) #19 15.48 Collecting snowballstemmer>=3.0.1 (from sphinx) #19 15.49 Downloading snowballstemmer-3.1.1-py3-none-any.whl.metadata (7.9 kB) #19 15.54 Collecting babel>=2.18 (from sphinx) #19 15.55 Downloading babel-2.18.0-py3-none-any.whl.metadata (2.2 kB) #19 15.61 Collecting alabaster>=1.0 (from sphinx) #19 15.61 Downloading alabaster-1.0.0-py3-none-any.whl.metadata (2.8 kB) #19 15.67 Collecting imagesize>=1.3 (from sphinx) #19 15.68 Downloading imagesize-2.0.1-py3-none-any.whl.metadata (7.0 kB) #19 15.74 Collecting requests>=2.32.5 (from sphinx) #19 15.75 Downloading requests-2.34.2-py3-none-any.whl.metadata (4.8 kB) #19 15.79 Collecting roman-numerals>=3.0 (from sphinx) #19 15.80 Downloading roman_numerals-4.1.0-py3-none-any.whl.metadata (3.3 kB) #19 15.86 Collecting pockets>=0.3 (from sphinxcontrib-napoleon) #19 15.87 Downloading pockets-0.9.1-py2.py3-none-any.whl.metadata (4.4 kB) #19 16.02 Collecting gsm0338 (from pyosmocom>=0.0.12->-r /tmp/pysim_requirements.txt (line 8)) #19 16.04 Downloading gsm0338-1.1.0-py3-none-any.whl.metadata (2.5 kB) #19 16.15 Collecting cffi>=2.0.0 (from cryptography->-r /tmp/pysim_requirements.txt (line 13)) #19 16.15 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (2.5 kB) #19 16.19 Collecting pycparser (from cffi>=2.0.0->cryptography->-r /tmp/pysim_requirements.txt (line 13)) #19 16.20 Downloading pycparser-3.12-py3-none-any.whl.metadata (9.7 kB) #19 16.27 Collecting idna>=2.5 (from hyperlink>=17.1.1->Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 16.28 Downloading idna-3.20-py3-none-any.whl.metadata (7.2 kB) #19 16.30 Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3/dist-packages (from Jinja2>=3.1->sphinx) (2.1.5) #19 16.38 Collecting charset_normalizer<4,>=2 (from requests>=2.32.5->sphinx) #19 16.39 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (46 kB) #19 16.45 Collecting urllib3<3,>=1.26 (from requests>=2.32.5->sphinx) #19 16.46 Downloading urllib3-2.8.0-py3-none-any.whl.metadata (7.4 kB) #19 16.52 Collecting certifi>=2023.5.7 (from requests>=2.32.5->sphinx) #19 16.53 Downloading certifi-2026.10.23-py3-none-any.whl.metadata (2.5 kB) #19 16.58 Collecting markdown-it-py>=2.2.0 (from rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 16.59 Downloading markdown_it_py-4.2.0-py3-none-any.whl.metadata (7.4 kB) #19 16.64 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 16.65 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) #19 16.70 Downloading cmd2-3.5.1-py3-none-any.whl (147 kB) #19 16.73 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl (31 kB) #19 16.76 Downloading twisted-23.10.0-py3-none-any.whl (3.2 MB) #19 16.81 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 57.0 MB/s eta 0:00:00 #19 16.82 Downloading ruff-0.17.3-py3-none-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (10.6 MB) #19 16.97 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.6/10.6 MB 75.5 MB/s eta 0:00:00 #19 16.98 Downloading sphinx-9.2.0-py3-none-any.whl (3.9 MB) #19 17.04 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.9/3.9 MB 60.0 MB/s eta 0:00:00 #19 17.06 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl (17 kB) #19 17.08 Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB) #19 17.11 Downloading jsonpath_ng-1.14.0-py3-none-any.whl (84 kB) #19 17.14 Downloading construct-2.10.70-py3-none-any.whl (63 kB) #19 17.16 Downloading bidict-0.24.1-py3-none-any.whl (36 kB) #19 17.19 Downloading pyosmocom-0.0.12-py3-none-any.whl (32 kB) #19 17.21 Downloading termcolor-3.3.0-py3-none-any.whl (7.7 kB) #19 17.24 Downloading colorlog-6.12.0-py3-none-any.whl (12 kB) #19 17.26 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (2.3 MB) #19 17.31 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 51.9 MB/s eta 0:00:00 #19 17.32 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl (4.8 MB) #19 17.38 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.8/4.8 MB 86.6 MB/s eta 0:00:00 #19 17.38 Downloading alabaster-1.0.0-py3-none-any.whl (13 kB) #19 17.41 Downloading attrs-26.1.0-py3-none-any.whl (67 kB) #19 17.44 Downloading automat-25.4.16-py3-none-any.whl (42 kB) #19 17.46 Downloading babel-2.18.0-py3-none-any.whl (10.2 MB) #19 17.59 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.2/10.2 MB 84.4 MB/s eta 0:00:00 #19 17.59 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (221 kB) #19 17.62 Downloading constantly-23.10.4-py3-none-any.whl (13 kB) #19 17.65 Downloading hyperlink-21.0.0-py2.py3-none-any.whl (74 kB) #19 17.67 Downloading idna-3.20-py3-none-any.whl (69 kB) #19 17.70 Downloading imagesize-2.0.1-py3-none-any.whl (14 kB) #19 17.73 Downloading incremental-24.11.0-py3-none-any.whl (21 kB) #19 17.75 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) #19 17.78 Downloading pockets-0.9.1-py2.py3-none-any.whl (26 kB) #19 17.81 Downloading pygments-2.21.0-py3-none-any.whl (1.3 MB) #19 17.85 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 33.7 MB/s eta 0:00:00 #19 17.86 Downloading pyparsing-3.3.3-py3-none-any.whl (126 kB) #19 17.89 Downloading pyperclip-1.11.0-py3-none-any.whl (11 kB) #19 17.91 Downloading requests-2.34.2-py3-none-any.whl (73 kB) #19 17.94 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (254 kB) #19 17.96 Downloading urllib3-2.8.0-py3-none-any.whl (135 kB) #19 17.99 Downloading certifi-2026.10.23-py3-none-any.whl (135 kB) #19 18.02 Downloading rich-15.0.0-py3-none-any.whl (310 kB) #19 18.04 Downloading markdown_it_py-4.2.0-py3-none-any.whl (91 kB) #19 18.07 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) #19 18.09 Downloading rich_argparse-1.8.0-py3-none-any.whl (25 kB) #19 18.12 Downloading roman_numerals-4.1.0-py3-none-any.whl (7.7 kB) #19 18.14 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) #19 18.17 Downloading snowballstemmer-3.1.1-py3-none-any.whl (104 kB) #19 18.19 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl (119 kB) #19 18.22 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl (82 kB) #19 18.25 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl (98 kB) #19 18.27 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl (78 kB) #19 18.30 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl (88 kB) #19 18.32 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl (92 kB) #19 18.35 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl (283 kB) #19 18.38 Downloading bitstruct-8.24.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (82 kB) #19 18.41 Downloading gsm0338-1.1.0-py3-none-any.whl (5.8 kB) #19 18.44 Downloading pycparser-3.12-py3-none-any.whl (62 kB) #19 18.52 Building wheels for collected packages: lcov_cobertura, sphinx-argparse, smpplib, asn1tools, smpp.pdu, smpp.twisted3, pyscard, pytlv #19 18.52 Building wheel for lcov_cobertura (pyproject.toml): started #19 18.64 Building wheel for lcov_cobertura (pyproject.toml): finished with status 'done' #19 18.64 Created wheel for lcov_cobertura: filename=lcov_cobertura-2.0.2-py3-none-any.whl size=11716 sha256=45f9105848b5141a5a6e167ce4d2aa934a8762eeec2bcce9883e39d4d1ccedfd #19 18.64 Stored in directory: /root/.cache/pip/wheels/b9/a4/13/8f640a807038bb8924745d8e57cbd8b4034170f7f9788ffab8 #19 18.64 Building wheel for sphinx-argparse (pyproject.toml): started #19 18.77 Building wheel for sphinx-argparse (pyproject.toml): finished with status 'done' #19 18.77 Created wheel for sphinx-argparse: filename=sphinx_argparse-0.4.0-py3-none-any.whl size=12719 sha256=2ccb4f10154d8aecaf8bc6e9538ead16663dfea67fc35eb24ba0cf5c52550b6d #19 18.77 Stored in directory: /tmp/pip-ephem-wheel-cache-9gu2zaw1/wheels/73/b7/19/d26631b7ef1c14ec1e1ab5e03c0cbd994720ce53e99f41792e #19 18.77 DEPRECATION: Building 'smpplib' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpplib'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 18.77 Building wheel for smpplib (setup.py): started #19 18.90 Building wheel for smpplib (setup.py): finished with status 'done' #19 18.90 Created wheel for smpplib: filename=smpplib-2.1.0-py3-none-any.whl size=29013 sha256=51ee1f543ad754ea1f76738ebd0cac7bd272a929463928cc2b29f9ed4714fc5b #19 18.90 Stored in directory: /tmp/pip-ephem-wheel-cache-9gu2zaw1/wheels/c7/1f/00/8310d8f80e9235411f5c532fa8639d4e8a55d6c60ce2f719e1 #19 18.90 Building wheel for asn1tools (setup.py): started #19 18.90 DEPRECATION: Building 'asn1tools' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'asn1tools'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 19.04 Building wheel for asn1tools (setup.py): finished with status 'done' #19 19.04 Created wheel for asn1tools: filename=asn1tools-0.166.0-py3-none-any.whl size=119785 sha256=09318ba5e21eee8228ce549e3aed39d71218ea5d84a6f6fb009a7c96b8188819 #19 19.04 Stored in directory: /tmp/pip-ephem-wheel-cache-9gu2zaw1/wheels/2f/48/f7/6b02e94c4a617fd3401d48992f12efefb61549179aeaea7ba5 #19 19.04 DEPRECATION: Building 'smpp.pdu' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.pdu'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 19.04 Building wheel for smpp.pdu (setup.py): started #19 19.16 Building wheel for smpp.pdu (setup.py): finished with status 'done' #19 19.16 Created wheel for smpp.pdu: filename=smpp_pdu-0.3-py3-none-any.whl size=31755 sha256=f6499e5d304e4682aebc9a25d9a765408742b70aa6d2ec3c5099aecf909b5190 #19 19.16 Stored in directory: /tmp/pip-ephem-wheel-cache-9gu2zaw1/wheels/ec/59/c8/1689acefa6165ca4c187514c7119267ae941b1075c4f9d7fee #19 19.16 DEPRECATION: Building 'smpp.twisted3' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.twisted3'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 19.16 Building wheel for smpp.twisted3 (setup.py): started #19 19.28 Building wheel for smpp.twisted3 (setup.py): finished with status 'done' #19 19.28 Created wheel for smpp.twisted3: filename=smpp_twisted3-0.8-py3-none-any.whl size=17529 sha256=44e8ed8a7c9c4c2a67104e79ffbeaf38b740b06b66cb55accd211514569fb904 #19 19.28 Stored in directory: /tmp/pip-ephem-wheel-cache-9gu2zaw1/wheels/d7/df/1e/ec5213d7c625fee8bc3ed25a094b2da2e711989dcf777efeac #19 19.28 Building wheel for pyscard (pyproject.toml): started #19 20.37 Building wheel for pyscard (pyproject.toml): finished with status 'done' #19 20.37 Created wheel for pyscard: filename=pyscard-2.3.2-cp313-cp313-linux_x86_64.whl size=243940 sha256=0d934d7fa638a5e84ba5b844b65a4d3043a285c212691d225f9fcc6ef8192091 #19 20.37 Stored in directory: /root/.cache/pip/wheels/b4/13/46/3cb029c61ac6760805b934bc12f4f42af806f50b9d78ed81be #19 20.37 DEPRECATION: Building 'pytlv' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'pytlv'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 20.37 Building wheel for pytlv (setup.py): started #19 20.49 Building wheel for pytlv (setup.py): finished with status 'done' #19 20.49 Created wheel for pytlv: filename=pytlv-0.71-py2.py3-none-any.whl size=16606 sha256=d0364156f88aa5c8e4a597a094afd4316d788d5abdcac8735545f7a09248e8a0 #19 20.49 Stored in directory: /root/.cache/pip/wheels/ef/7c/d8/e0f4af40e0231f40f63199f2bf7014ad923f3e01f744324f4d #19 20.49 Successfully built lcov_cobertura sphinx-argparse smpplib asn1tools smpp.pdu smpp.twisted3 pyscard pytlv #19 20.56 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 #19 21.35 Attempting uninstall: Pygments #19 21.36 Found existing installation: Pygments 2.18.0 #19 21.36 error: uninstall-no-record-file #19 21.36 #19 21.36 × Cannot uninstall Pygments 2.18.0 #19 21.36 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. #19 21.36 #19 21.36 hint: The package was installed by debian. You should check if it can uninstall the package. #19 21.36 #19 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------

[ 8/18] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' 'git+https://github.com/podshumok/python-smpplib.git' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt: 20.56 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 21.35 Attempting uninstall: Pygments 21.36 Found existing installation: Pygments 2.18.0 21.36 error: uninstall-no-record-file 21.36 21.36 × Cannot uninstall Pygments 2.18.0 21.36 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. 21.36 21.36 hint: The package was installed by debian. You should check if it can uninstall the package. 21.36

ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:97: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/debian-trixie-build'> + exit 1 + RC=1 + uptime + grep --color=always -o load.* load average: 1.62, 2.19, 1.53 + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?