Build failed in Jenkins: nplab-m3ua-test #3413

See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/3413/display/redirect> Changes: ------------------------------------------ [...truncated 464.91 KiB...] #19 10.93 Downloading sphinx-9.2.0-py3-none-any.whl.metadata (5.9 kB) #19 10.98 Collecting sphinxcontrib-napoleon #19 10.99 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl.metadata (6.2 kB) #19 11.05 Collecting pyscard (from -r /tmp/pysim_requirements.txt (line 1)) #19 11.06 Downloading pyscard-2.3.1.tar.gz (160 kB) #19 11.12 Installing build dependencies: started #19 11.70 Installing build dependencies: finished with status 'done' #19 11.70 Getting requirements to build wheel: started #19 11.90 Getting requirements to build wheel: finished with status 'done' #19 11.90 Preparing metadata (pyproject.toml): started #19 12.00 Preparing metadata (pyproject.toml): finished with status 'done' #19 12.02 Collecting pyserial (from -r /tmp/pysim_requirements.txt (line 2)) #19 12.03 Downloading pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) #19 12.18 Collecting pytlv (from -r /tmp/pysim_requirements.txt (line 3)) #19 12.28 Downloading pytlv-0.71.tar.gz (15 kB) #19 12.32 Preparing metadata (setup.py): started #19 12.42 Preparing metadata (setup.py): finished with status 'done' #19 12.46 Collecting cmd2<4.0,>=2.6.2 (from -r /tmp/pysim_requirements.txt (line 4)) #19 12.47 Downloading cmd2-3.5.1-py3-none-any.whl.metadata (16 kB) #19 12.52 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) #19 12.53 Downloading jsonpath_ng-1.13.0-py3-none-any.whl.metadata (17 kB) #19 12.59 Collecting construct>=2.10.70 (from -r /tmp/pysim_requirements.txt (line 6)) #19 12.60 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) #19 12.66 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) #19 12.66 Downloading bidict-0.24.1-py3-none-any.whl.metadata (8.7 kB) #19 12.81 Collecting pyosmocom>=0.0.12 (from -r /tmp/pysim_requirements.txt (line 8)) #19 12.82 Downloading pyosmocom-0.0.12-py3-none-any.whl.metadata (1.4 kB) #19 12.84 Requirement already satisfied: pyyaml>=5.4 in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 9)) (6.0.2) #19 12.88 Collecting termcolor (from -r /tmp/pysim_requirements.txt (line 10)) #19 12.89 Downloading termcolor-3.3.0-py3-none-any.whl.metadata (6.5 kB) #19 12.95 Collecting colorlog (from -r /tmp/pysim_requirements.txt (line 11)) #19 12.96 Downloading colorlog-6.12.0-py3-none-any.whl.metadata (11 kB) #19 13.05 Collecting pycryptodomex (from -r /tmp/pysim_requirements.txt (line 12)) #19 13.06 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (3.4 kB) #19 13.19 Collecting cryptography (from -r /tmp/pysim_requirements.txt (line 13)) #19 13.19 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (4.4 kB) #19 13.21 Requirement already satisfied: packaging in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 15)) (25.0) #19 13.23 Collecting six (from smpplib==2.1.0) #19 13.24 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) #19 13.30 Collecting pyparsing>=3.0.6 (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #19 13.31 Downloading pyparsing-3.3.3-py3-none-any.whl.metadata (5.9 kB) #19 13.38 Collecting bitstruct (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #19 13.39 Downloading bitstruct-8.24.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (7.3 kB) #19 13.44 Collecting Twisted~=23.10.0 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 13.45 Downloading twisted-23.10.0-py3-none-any.whl.metadata (9.5 kB) #19 13.61 Collecting smpp.pdu3~=0.4 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 13.62 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl.metadata (929 bytes) #19 13.68 Collecting pyperclip>=1.8.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 13.69 Downloading pyperclip-1.11.0-py3-none-any.whl.metadata (2.4 kB) #19 13.76 Collecting rich>=15.0.0 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 13.77 Downloading rich-15.0.0-py3-none-any.whl.metadata (18 kB) #19 13.82 Collecting rich-argparse>=1.7.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 13.82 Downloading rich_argparse-1.8.0-py3-none-any.whl.metadata (15 kB) #19 13.88 Collecting attrs>=21.3.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 13.89 Downloading attrs-26.1.0-py3-none-any.whl.metadata (8.8 kB) #19 13.94 Collecting automat>=0.8.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 13.95 Downloading automat-25.4.16-py3-none-any.whl.metadata (8.4 kB) #19 13.99 Collecting constantly>=15.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.01 Downloading constantly-23.10.4-py3-none-any.whl.metadata (1.8 kB) #19 14.05 Collecting hyperlink>=17.1.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.07 Downloading hyperlink-21.0.0-py2.py3-none-any.whl.metadata (1.5 kB) #19 14.12 Collecting incremental>=22.10.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.12 Downloading incremental-24.11.0-py3-none-any.whl.metadata (9.5 kB) #19 14.14 Requirement already satisfied: typing-extensions>=4.2.0 in /usr/lib/python3/dist-packages (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) (4.13.2) #19 14.23 Collecting zope-interface>=5 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 14.24 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl.metadata (48 kB) #19 14.28 Collecting sphinxcontrib-applehelp>=1.0.7 (from sphinx) #19 14.29 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 14.34 Collecting sphinxcontrib-devhelp>=1.0.6 (from sphinx) #19 14.35 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 14.41 Collecting sphinxcontrib-htmlhelp>=2.0.6 (from sphinx) #19 14.42 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl.metadata (2.3 kB) #19 14.47 Collecting sphinxcontrib-jsmath>=1.0.1 (from sphinx) #19 14.47 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl.metadata (2.6 kB) #19 14.52 Collecting sphinxcontrib-qthelp>=1.0.6 (from sphinx) #19 14.53 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #19 14.57 Collecting sphinxcontrib-serializinghtml>=1.1.9 (from sphinx) #19 14.58 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl.metadata (2.4 kB) #19 14.64 Collecting Jinja2>=3.1 (from sphinx) #19 14.64 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) #19 14.70 Collecting Pygments>=2.19 (from sphinx) #19 14.71 Downloading pygments-2.21.0-py3-none-any.whl.metadata (2.5 kB) #19 14.73 Requirement already satisfied: docutils<0.24,>=0.21 in /usr/lib/python3/dist-packages (from sphinx) (0.21.2) #19 14.76 Collecting snowballstemmer>=3.0.1 (from sphinx) #19 14.77 Downloading snowballstemmer-3.1.1-py3-none-any.whl.metadata (7.9 kB) #19 14.82 Collecting babel>=2.18 (from sphinx) #19 14.83 Downloading babel-2.18.0-py3-none-any.whl.metadata (2.2 kB) #19 14.89 Collecting alabaster>=1.0 (from sphinx) #19 14.90 Downloading alabaster-1.0.0-py3-none-any.whl.metadata (2.8 kB) #19 14.96 Collecting imagesize>=1.3 (from sphinx) #19 14.97 Downloading imagesize-2.0.1-py3-none-any.whl.metadata (7.0 kB) #19 15.03 Collecting requests>=2.32.5 (from sphinx) #19 15.04 Downloading requests-2.34.2-py3-none-any.whl.metadata (4.8 kB) #19 15.09 Collecting roman-numerals>=3.0 (from sphinx) #19 15.10 Downloading roman_numerals-4.1.0-py3-none-any.whl.metadata (3.3 kB) #19 15.17 Collecting pockets>=0.3 (from sphinxcontrib-napoleon) #19 15.18 Downloading pockets-0.9.1-py2.py3-none-any.whl.metadata (4.4 kB) #19 15.33 Collecting gsm0338 (from pyosmocom>=0.0.12->-r /tmp/pysim_requirements.txt (line 8)) #19 15.34 Downloading gsm0338-1.1.0-py3-none-any.whl.metadata (2.5 kB) #19 15.46 Collecting cffi>=2.0.0 (from cryptography->-r /tmp/pysim_requirements.txt (line 13)) #19 15.46 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (2.5 kB) #19 15.50 Collecting pycparser (from cffi>=2.0.0->cryptography->-r /tmp/pysim_requirements.txt (line 13)) #19 15.51 Downloading pycparser-3.12-py3-none-any.whl.metadata (9.7 kB) #19 15.59 Collecting idna>=2.5 (from hyperlink>=17.1.1->Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted->-r /tmp/pysim_requirements.txt (line 17)) #19 15.60 Downloading idna-3.20-py3-none-any.whl.metadata (7.2 kB) #19 15.62 Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3/dist-packages (from Jinja2>=3.1->sphinx) (2.1.5) #19 15.71 Collecting charset_normalizer<4,>=2 (from requests>=2.32.5->sphinx) #19 15.72 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (46 kB) #19 15.77 Collecting urllib3<3,>=1.26 (from requests>=2.32.5->sphinx) #19 15.78 Downloading urllib3-2.8.0-py3-none-any.whl.metadata (7.4 kB) #19 15.84 Collecting certifi>=2023.5.7 (from requests>=2.32.5->sphinx) #19 15.84 Downloading certifi-2026.10.23-py3-none-any.whl.metadata (2.5 kB) #19 15.90 Collecting markdown-it-py>=2.2.0 (from rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 15.91 Downloading markdown_it_py-4.2.0-py3-none-any.whl.metadata (7.4 kB) #19 15.97 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #19 15.98 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) #19 16.03 Downloading cmd2-3.5.1-py3-none-any.whl (147 kB) #19 16.07 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl (31 kB) #19 16.10 Downloading twisted-23.10.0-py3-none-any.whl (3.2 MB) #19 16.17 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 49.7 MB/s eta 0:00:00 #19 16.18 Downloading ruff-0.17.2-py3-none-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (10.5 MB) #19 16.31 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.5/10.5 MB 82.8 MB/s eta 0:00:00 #19 16.32 Downloading sphinx-9.2.0-py3-none-any.whl (3.9 MB) #19 16.38 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.9/3.9 MB 64.7 MB/s eta 0:00:00 #19 16.39 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl (17 kB) #19 16.42 Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB) #19 16.45 Downloading jsonpath_ng-1.13.0-py3-none-any.whl (83 kB) #19 16.48 Downloading construct-2.10.70-py3-none-any.whl (63 kB) #19 16.50 Downloading bidict-0.24.1-py3-none-any.whl (36 kB) #19 16.53 Downloading pyosmocom-0.0.12-py3-none-any.whl (32 kB) #19 16.56 Downloading termcolor-3.3.0-py3-none-any.whl (7.7 kB) #19 16.58 Downloading colorlog-6.12.0-py3-none-any.whl (12 kB) #19 16.61 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (2.3 MB) #19 16.65 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 51.9 MB/s eta 0:00:00 #19 16.66 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl (4.8 MB) #19 16.73 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.8/4.8 MB 70.8 MB/s eta 0:00:00 #19 16.74 Downloading alabaster-1.0.0-py3-none-any.whl (13 kB) #19 16.77 Downloading attrs-26.1.0-py3-none-any.whl (67 kB) #19 16.80 Downloading automat-25.4.16-py3-none-any.whl (42 kB) #19 16.82 Downloading babel-2.18.0-py3-none-any.whl (10.2 MB) #19 16.95 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.2/10.2 MB 81.7 MB/s eta 0:00:00 #19 16.96 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (221 kB) #19 16.99 Downloading constantly-23.10.4-py3-none-any.whl (13 kB) #19 17.01 Downloading hyperlink-21.0.0-py2.py3-none-any.whl (74 kB) #19 17.04 Downloading idna-3.20-py3-none-any.whl (69 kB) #19 17.08 Downloading imagesize-2.0.1-py3-none-any.whl (14 kB) #19 17.10 Downloading incremental-24.11.0-py3-none-any.whl (21 kB) #19 17.13 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) #19 17.16 Downloading pockets-0.9.1-py2.py3-none-any.whl (26 kB) #19 17.18 Downloading pygments-2.21.0-py3-none-any.whl (1.3 MB) #19 17.22 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 29.6 MB/s eta 0:00:00 #19 17.23 Downloading pyparsing-3.3.3-py3-none-any.whl (126 kB) #19 17.27 Downloading pyperclip-1.11.0-py3-none-any.whl (11 kB) #19 17.29 Downloading requests-2.34.2-py3-none-any.whl (73 kB) #19 17.32 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (254 kB) #19 17.36 Downloading urllib3-2.8.0-py3-none-any.whl (135 kB) #19 17.39 Downloading certifi-2026.10.23-py3-none-any.whl (135 kB) #19 17.42 Downloading rich-15.0.0-py3-none-any.whl (310 kB) #19 17.45 Downloading markdown_it_py-4.2.0-py3-none-any.whl (91 kB) #19 17.48 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) #19 17.51 Downloading rich_argparse-1.8.0-py3-none-any.whl (25 kB) #19 17.53 Downloading roman_numerals-4.1.0-py3-none-any.whl (7.7 kB) #19 17.56 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) #19 17.58 Downloading snowballstemmer-3.1.1-py3-none-any.whl (104 kB) #19 17.62 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl (119 kB) #19 17.64 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl (82 kB) #19 17.67 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl (98 kB) #19 17.71 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl (78 kB) #19 17.74 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl (88 kB) #19 17.76 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl (92 kB) #19 17.80 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl (283 kB) #19 17.83 Downloading bitstruct-8.24.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (82 kB) #19 17.87 Downloading gsm0338-1.1.0-py3-none-any.whl (5.8 kB) #19 17.89 Downloading pycparser-3.12-py3-none-any.whl (62 kB) #19 17.97 Building wheels for collected packages: lcov_cobertura, sphinx-argparse, smpplib, asn1tools, smpp.pdu, smpp.twisted3, pyscard, pytlv #19 17.97 Building wheel for lcov_cobertura (pyproject.toml): started #19 18.09 Building wheel for lcov_cobertura (pyproject.toml): finished with status 'done' #19 18.09 Created wheel for lcov_cobertura: filename=lcov_cobertura-2.0.2-py3-none-any.whl size=11716 sha256=9afe6b2868964c1c4fa06ae1f5de4c188861030c147c1e49c71054a9d5e70b77 #19 18.09 Stored in directory: /root/.cache/pip/wheels/b9/a4/13/8f640a807038bb8924745d8e57cbd8b4034170f7f9788ffab8 #19 18.09 Building wheel for sphinx-argparse (pyproject.toml): started #19 18.20 Building wheel for sphinx-argparse (pyproject.toml): finished with status 'done' #19 18.20 Created wheel for sphinx-argparse: filename=sphinx_argparse-0.4.0-py3-none-any.whl size=12719 sha256=2ccb4f10154d8aecaf8bc6e9538ead16663dfea67fc35eb24ba0cf5c52550b6d #19 18.20 Stored in directory: /tmp/pip-ephem-wheel-cache-sgt33w2o/wheels/73/b7/19/d26631b7ef1c14ec1e1ab5e03c0cbd994720ce53e99f41792e #19 18.20 DEPRECATION: Building 'smpplib' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpplib'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 18.20 Building wheel for smpplib (setup.py): started #19 18.33 Building wheel for smpplib (setup.py): finished with status 'done' #19 18.33 Created wheel for smpplib: filename=smpplib-2.1.0-py3-none-any.whl size=29013 sha256=f1a807f1cbd4c5ad8d0e8e61cace856586fca7374c4b471caacc6aa91ceb430b #19 18.33 Stored in directory: /tmp/pip-ephem-wheel-cache-sgt33w2o/wheels/c7/1f/00/8310d8f80e9235411f5c532fa8639d4e8a55d6c60ce2f719e1 #19 18.33 DEPRECATION: Building 'asn1tools' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'asn1tools'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 18.33 Building wheel for asn1tools (setup.py): started #19 18.47 Building wheel for asn1tools (setup.py): finished with status 'done' #19 18.47 Created wheel for asn1tools: filename=asn1tools-0.166.0-py3-none-any.whl size=119785 sha256=5c8e9a09de56147629dffb27111458fced356501e99adf8413ee335a0663e23c #19 18.47 Stored in directory: /tmp/pip-ephem-wheel-cache-sgt33w2o/wheels/2f/48/f7/6b02e94c4a617fd3401d48992f12efefb61549179aeaea7ba5 #19 18.47 DEPRECATION: Building 'smpp.pdu' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.pdu'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 18.47 Building wheel for smpp.pdu (setup.py): started #19 18.59 Building wheel for smpp.pdu (setup.py): finished with status 'done' #19 18.59 Created wheel for smpp.pdu: filename=smpp_pdu-0.3-py3-none-any.whl size=31755 sha256=6009528d17541c6a2b38d68f048baa545c0faa131b8c0a2b40d7f51e5cac82f6 #19 18.59 Stored in directory: /tmp/pip-ephem-wheel-cache-sgt33w2o/wheels/ec/59/c8/1689acefa6165ca4c187514c7119267ae941b1075c4f9d7fee #19 18.59 DEPRECATION: Building 'smpp.twisted3' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.twisted3'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 18.59 Building wheel for smpp.twisted3 (setup.py): started #19 18.71 Building wheel for smpp.twisted3 (setup.py): finished with status 'done' #19 18.71 Created wheel for smpp.twisted3: filename=smpp_twisted3-0.8-py3-none-any.whl size=17529 sha256=e7de5b1a35c2c2a52bbea8a6205232ee5c9139b4c172725d04eaed66e1b4c587 #19 18.71 Stored in directory: /tmp/pip-ephem-wheel-cache-sgt33w2o/wheels/d7/df/1e/ec5213d7c625fee8bc3ed25a094b2da2e711989dcf777efeac #19 18.71 Building wheel for pyscard (pyproject.toml): started #19 19.81 Building wheel for pyscard (pyproject.toml): finished with status 'done' #19 19.81 Created wheel for pyscard: filename=pyscard-2.3.1-cp313-cp313-linux_x86_64.whl size=243938 sha256=5303950cfee32280fc1aaa2989157192f0e0ac13d59b2c73b5045d7d4f512546 #19 19.81 Stored in directory: /root/.cache/pip/wheels/82/bb/ae/d47c99a6ef7eb01a71857e66a2b51e63f56e84ab418fc7952d #19 19.82 DEPRECATION: Building 'pytlv' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'pytlv'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #19 19.82 Building wheel for pytlv (setup.py): started #19 19.95 Building wheel for pytlv (setup.py): finished with status 'done' #19 19.95 Created wheel for pytlv: filename=pytlv-0.71-py2.py3-none-any.whl size=16606 sha256=859e6bb477789d36879a26b2a5d6be5c818752a2efe88cbe93311a14e08e286e #19 19.95 Stored in directory: /root/.cache/pip/wheels/ef/7c/d8/e0f4af40e0231f40f63199f2bf7014ad923f3e01f744324f4d #19 19.95 Successfully built lcov_cobertura sphinx-argparse smpplib asn1tools smpp.pdu smpp.twisted3 pyscard pytlv #19 20.02 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 #19 20.79 Attempting uninstall: Pygments #19 20.80 Found existing installation: Pygments 2.18.0 #19 20.80 error: uninstall-no-record-file #19 20.80 #19 20.80 × Cannot uninstall Pygments 2.18.0 #19 20.80 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. #19 20.80 #19 20.80 hint: The package was installed by debian. You should check if it can uninstall the package. #19 20.80 #19 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------

[ 8/18] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' 'git+https://github.com/podshumok/python-smpplib.git' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt: 20.02 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 20.79 Attempting uninstall: Pygments 20.80 Found existing installation: Pygments 2.18.0 20.80 error: uninstall-no-record-file 20.80 20.80 × Cannot uninstall Pygments 2.18.0 20.80 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. 20.80 20.80 hint: The package was installed by debian. You should check if it can uninstall the package. 20.80

ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:97: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/debian-trixie-build'> + exit 1 + RC=1 + + grep --color=always -o load.* uptime load average: 1.35, 2.07, 1.47 + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?