See https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/3194/display/redirect?page=changes
Changes:
[Oliver Smith] redmine: upgrade to 6.1.3
------------------------------------------ [...truncated 14.43 KiB...] #29 1.138 Building dependency tree... #29 1.198 Reading state information... #29 1.282 The following additional packages will be installed: #29 1.282 sdcc-libraries #29 1.282 Suggested packages: #29 1.282 python sdcc-ucsim #29 1.282 Recommended packages: #29 1.282 gputils #29 1.293 The following NEW packages will be installed: #29 1.293 sdcc sdcc-libraries #29 1.333 0 upgraded, 2 newly installed, 0 to remove and 3 not upgraded. #29 1.333 Need to get 3899 kB of archives. #29 1.333 After this operation, 28.7 MB of additional disk space will be used. #29 1.333 Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ sdcc-libraries 4.2.0~osmocom3.113.9edd [1584 kB] #29 1.407 Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ sdcc 4.2.0~osmocom3.113.9edd [2315 kB] #29 1.680 debconf: unable to initialize frontend: Dialog #29 1.680 debconf: (TERM is not set, so the dialog frontend is not usable.) #29 1.680 debconf: falling back to frontend: Readline #29 1.684 debconf: unable to initialize frontend: Readline #29 1.684 debconf: (This frontend requires a controlling tty.) #29 1.684 debconf: falling back to frontend: Teletype #29 1.687 debconf: unable to initialize frontend: Teletype #29 1.687 debconf: (This frontend requires a controlling tty.) #29 1.687 debconf: falling back to frontend: Noninteractive #29 2.032 Fetched 3899 kB in 0s (14.7 MB/s) #29 2.085 Selecting previously unselected package sdcc-libraries. #29 2.085 (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 130931 files and directories currently installed.) #29 2.123 Preparing to unpack .../sdcc-libraries_4.2.0~osmocom3.113.9edd_all.deb ... #29 2.135 Unpacking sdcc-libraries (4.2.0~osmocom3.113.9edd) ... #29 2.281 Selecting previously unselected package sdcc. #29 2.299 Preparing to unpack .../sdcc_4.2.0~osmocom3.113.9edd_amd64.deb ... #29 2.311 Unpacking sdcc (4.2.0~osmocom3.113.9edd) ... #29 2.508 Setting up sdcc-libraries (4.2.0~osmocom3.113.9edd) ... #29 2.544 Setting up sdcc (4.2.0~osmocom3.113.9edd) ... #29 2.581 Processing triggers for man-db (2.13.1-1) ... #29 2.668 + apt-get clean #29 DONE 2.8s
#30 exporting to image #30 exporting layers #30 exporting layers 0.3s done #30 writing image sha256:187990990e25338938473799d00a4df3b59087eba0dd10265b43ab962f0c0bd1 done #30 naming to docker.io/osmocom-build/debian-trixie-build:latest 0.0s done #30 DONE 0.4s rm -rf .common make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/ws/debian-trixie-build' + docker_image_exists debian-trixie-build + docker images -q osmocom-build/debian-trixie-build + test -n 187990990e25 + list_osmo_packages debian-trixie debian-trixie-build + local distro=debian-trixie + local image=debian-trixie-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-trixie-build -c + [ -n ] + return + docker_distro_from_image_name osmo-bsc-master + echo debian-trixie + distro_arg=debian-trixie + [ -z ] + docker_upstream_distro_from_image_name osmo-bsc-master + echo debian:trixie + upstream_distro_arg=debian:trixie + docker_dir_from_image_name osmo-bsc-master + echo osmo-bsc-master + dir=osmo-bsc-master + [ -z ] + pull_arg=--pull + grep ^FROM ../osmo-bsc-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-bsc-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-bsc-master BUILD_ARGS= UPSTREAM_DISTRO=debian:trixie DISTRO=debian-trixie IMAGE=osmocom-build/osmo-bsc-master OSMO_TTCN3_BRANCH=master make: Entering directory 'https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/ws/osmo-bsc-master' awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/ws/common .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:trixie \ --build-arg DISTRO=debian-trixie \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg M3UA_TESTTOOL_BRANCH=osmocom/master \ --build-arg OSMO_BB_BRANCH=ttcn3-bts-test \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_REMSIM_BRANCH=master \ --build-arg OSMO_S1GW_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ -t osmocom-build/osmo-bsc-master:latest . #0 building with "default" instance using docker driver
#1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.39kB done #1 WARN: InvalidDefaultArgInFrom: Default value for ARG $USER/$DISTRO-build results in empty or invalid base image name (line 3) #1 DONE 0.1s
#2 [internal] load metadata for docker.io/osmocom-build/debian-trixie-build:latest #2 DONE 0.0s
#3 [internal] load .dockerignore #3 transferring context: #3 transferring context: 2B done #3 DONE 0.1s
#4 [internal] load build context #4 DONE 0.0s
#5 [1/8] FROM docker.io/osmocom-build/debian-trixie-build:latest #5 DONE 0.1s
#6 [5/8] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-BSC/+/MASTER?FORMAT=TEXT /tmp/commit-osmo-bsc #6 DONE 0.1s
#4 [internal] load build context #4 transferring context: 4.21kB done #4 DONE 0.1s
#7 [2/8] RUN CASE "debian-trixie" in debian*) apt-get update && apt-get install -y --no-install-recommends libosmocore-dev libosmo-abis-dev libosmo-netif-dev libosmo-sigtran-dev libosmo-mgcp-client-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libosmo-mgcp-client)" "pkgconfig(libosmo-netif)" "pkgconfig(libosmo-sigtran)" "pkgconfig(libosmoabis)" "pkgconfig(libosmocore)" "pkgconfig(libosmoctrl)" "pkgconfig(libosmogb)" "pkgconfig(libosmogsm)" "pkgconfig(libosmovty)" ;; esac #7 0.430 Hit:1 http://deb.debian.org/debian trixie InRelease #7 0.430 Hit:2 http://deb.debian.org/debian trixie-updates InRelease #7 0.430 Hit:3 http://deb.debian.org/debian-security trixie-security InRelease #7 0.430 Hit:4 https://downloads.osmocom.org/packages/osmocom:/misc/Debian_13 ./ InRelease #7 0.430 Hit:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_13 ./ InRelease #7 0.540 Reading package lists... #7 0.855 Reading package lists... #7 1.151 Building dependency tree... #7 1.215 Reading state information... #7 1.302 Solving dependencies... #7 1.316 Some packages could not be installed. This may mean that you have #7 1.316 requested an impossible situation or if you are using the unstable #7 1.316 distribution that some required packages have not yet been created #7 1.316 or been moved out of Incoming. #7 1.316 The following information may help to resolve the situation: #7 1.316 #7 1.316 The following packages have unmet dependencies: #7 1.316 libosmo-abis-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed #7 1.316 Depends: libosmotrau11 (= 2.1.0.13.898f6.202607051800) but it is not going to be installed #7 1.316 Depends: libosmoabis15 (= 2.1.0.13.898f6.202607051800) but it is not going to be installed #7 1.316 libosmo-mgcp-client-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed #7 1.316 Depends: libosmo-mgcp-client14 (= 1.15.0.1.8afba.202607051800) but it is not going to be installed #7 1.316 libosmo-netif-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed #7 1.316 Depends: libosmocore but it is not going to be installed #7 1.316 Depends: libosmonetif11 (= 1.7.0.16.4990f.202607051800) but it is not going to be installed #7 1.316 libosmo-sigtran-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed #7 1.316 Depends: libosmo-sigtran12 (= 2.2.1.115.81f7d.202607051800) but it is not going to be installed #7 1.316 libosmocore-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed #7 1.316 Depends: libosmocore but it is not going to be installed #7 1.317 E: Unable to correct problems, you have held broken packages. #7 1.317 E: The following information from --solver 3.0 may provide additional context: #7 1.317 Unable to satisfy dependencies. Reached two conflicting decisions: #7 1.317 1. libosmo-sigtran-dev:amd64=2.2.1.115.81f7d.202607051800 is selected for install #7 1.317 2. libosmo-sigtran-dev:amd64=2.2.1.115.81f7d.202607051800 Depends osmocom-nightly (= 202607051800) #7 1.317 but none of the choices are installable: #7 1.317 [no choices] #7 ERROR: process "/bin/sh -c case "$DISTRO" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tlibosmocore-dev \t\t\tlibosmo-abis-dev \t\t\tlibosmo-netif-dev \t\t\tlibosmo-sigtran-dev \t\t\tlibosmo-mgcp-client-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t"pkgconfig(libosmo-mgcp-client)" \t\t\t"pkgconfig(libosmo-netif)" \t\t\t"pkgconfig(libosmo-sigtran)" \t\t\t"pkgconfig(libosmoabis)" \t\t\t"pkgconfig(libosmocore)" \t\t\t"pkgconfig(libosmoctrl)" \t\t\t"pkgconfig(libosmogb)" \t\t\t"pkgconfig(libosmogsm)" \t\t\t"pkgconfig(libosmovty)" \t\t;; \tesac" did not complete successfully: exit code: 100 ------
[2/8] RUN CASE "debian-trixie" in debian*) apt-get update && apt-get install -y --no-install-recommends libosmocore-dev libosmo-abis-dev libosmo-netif-dev libosmo-sigtran-dev libosmo-mgcp-client-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libosmo-mgcp-client)" "pkgconfig(libosmo-netif)" "pkgconfig(libosmo-sigtran)" "pkgconfig(libosmoabis)" "pkgconfig(libosmocore)" "pkgconfig(libosmoctrl)" "pkgconfig(libosmogb)" "pkgconfig(libosmogsm)" "pkgconfig(libosmovty)" ;; esac:
1.316 Depends: libosmo-sigtran12 (= 2.2.1.115.81f7d.202607051800) but it is not going to be installed 1.316 libosmocore-dev : Depends: osmocom-nightly (= 202607051800) but 202607061943 is to be installed 1.316 Depends: libosmocore but it is not going to be installed 1.317 E: Unable to correct problems, you have held broken packages. 1.317 E: The following information from --solver 3.0 may provide additional context: 1.317 Unable to satisfy dependencies. Reached two conflicting decisions: 1.317 1. libosmo-sigtran-dev:amd64=2.2.1.115.81f7d.202607051800 is selected for install 1.317 2. libosmo-sigtran-dev:amd64=2.2.1.115.81f7d.202607051800 Depends osmocom-nightly (= 202607051800) 1.317 but none of the choices are installable: 1.317 [no choices] ------
[33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG $USER/$DISTRO-build results in empty or invalid base image name (line 3) Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> libosmocore-dev \ 12 | >>> libosmo-abis-dev \ 13 | >>> libosmo-netif-dev \ 14 | >>> libosmo-sigtran-dev \ 15 | >>> libosmo-mgcp-client-dev && \ 16 | >>> apt-get clean \ 17 | >>> ;; \ 18 | >>> centos*) \ 19 | >>> dnf install -y \ 20 | >>> "pkgconfig(libosmo-mgcp-client)" \ 21 | >>> "pkgconfig(libosmo-netif)" \ 22 | >>> "pkgconfig(libosmo-sigtran)" \ 23 | >>> "pkgconfig(libosmoabis)" \ 24 | >>> "pkgconfig(libosmocore)" \ 25 | >>> "pkgconfig(libosmoctrl)" \ 26 | >>> "pkgconfig(libosmogb)" \ 27 | >>> "pkgconfig(libosmogsm)" \ 28 | >>> "pkgconfig(libosmovty)" \ 29 | >>> ;; \ 30 | >>> esac 31 | -------------------- ERROR: failed to solve: process "/bin/sh -c case "$DISTRO" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tlibosmocore-dev \t\t\tlibosmo-abis-dev \t\t\tlibosmo-netif-dev \t\t\tlibosmo-sigtran-dev \t\t\tlibosmo-mgcp-client-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t"pkgconfig(libosmo-mgcp-client)" \t\t\t"pkgconfig(libosmo-netif)" \t\t\t"pkgconfig(libosmo-sigtran)" \t\t\t"pkgconfig(libosmoabis)" \t\t\t"pkgconfig(libosmocore)" \t\t\t"pkgconfig(libosmoctrl)" \t\t\t"pkgconfig(libosmogb)" \t\t\t"pkgconfig(libosmogsm)" \t\t\t"pkgconfig(libosmovty)" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:97: docker-build] Error 1 make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test/ws/osmo-bsc-master' + exit 1 + RC=1 + uptime + grep --color=always -o load.* [01;31m[Kload average: 0.17, 0.56, 2.60[m[K + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?