See https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/3378/display/redirect
Changes:
------------------------------------------ [...truncated 427.67 KiB...] #20 11.17 Downloading sphinx-9.2.0-py3-none-any.whl.metadata (5.9 kB) #20 11.23 Collecting sphinxcontrib-napoleon #20 11.24 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl.metadata (6.2 kB) #20 11.31 Collecting pyscard (from -r /tmp/pysim_requirements.txt (line 1)) #20 11.31 Downloading pyscard-2.3.1.tar.gz (160 kB) #20 11.37 Installing build dependencies: started #20 11.95 Installing build dependencies: finished with status 'done' #20 11.95 Getting requirements to build wheel: started #20 12.16 Getting requirements to build wheel: finished with status 'done' #20 12.16 Preparing metadata (pyproject.toml): started #20 12.27 Preparing metadata (pyproject.toml): finished with status 'done' #20 12.30 Collecting pyserial (from -r /tmp/pysim_requirements.txt (line 2)) #20 12.31 Downloading pyserial-3.5-py2.py3-none-any.whl.metadata (1.6 kB) #20 12.46 Collecting pytlv (from -r /tmp/pysim_requirements.txt (line 3)) #20 12.47 Downloading pytlv-0.71.tar.gz (15 kB) #20 12.51 Preparing metadata (setup.py): started #20 12.62 Preparing metadata (setup.py): finished with status 'done' #20 12.67 Collecting cmd2<4.0,>=2.6.2 (from -r /tmp/pysim_requirements.txt (line 4)) #20 12.68 Downloading cmd2-3.5.1-py3-none-any.whl.metadata (16 kB) #20 12.76 Collecting jsonpath-ng (from -r /tmp/pysim_requirements.txt (line 5)) #20 12.77 Downloading jsonpath_ng-1.12.0-py3-none-any.whl.metadata (17 kB) #20 12.83 Collecting construct>=2.10.70 (from -r /tmp/pysim_requirements.txt (line 6)) #20 12.84 Downloading construct-2.10.70-py3-none-any.whl.metadata (4.2 kB) #20 12.91 Collecting bidict (from -r /tmp/pysim_requirements.txt (line 7)) #20 12.92 Downloading bidict-0.24.1-py3-none-any.whl.metadata (8.7 kB) #20 13.07 Collecting pyosmocom>=0.0.12 (from -r /tmp/pysim_requirements.txt (line 8)) #20 13.08 Downloading pyosmocom-0.0.12-py3-none-any.whl.metadata (1.4 kB) #20 13.10 Requirement already satisfied: pyyaml>=5.4 in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 9)) (6.0.2) #20 13.14 Collecting termcolor (from -r /tmp/pysim_requirements.txt (line 10)) #20 13.15 Downloading termcolor-3.3.0-py3-none-any.whl.metadata (6.5 kB) #20 13.22 Collecting colorlog (from -r /tmp/pysim_requirements.txt (line 11)) #20 13.23 Downloading colorlog-6.12.0-py3-none-any.whl.metadata (11 kB) #20 13.34 Collecting pycryptodomex (from -r /tmp/pysim_requirements.txt (line 12)) #20 13.35 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (3.4 kB) #20 13.51 Collecting cryptography (from -r /tmp/pysim_requirements.txt (line 13)) #20 13.51 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl.metadata (4.4 kB) #20 13.53 Requirement already satisfied: packaging in /usr/lib/python3/dist-packages (from -r /tmp/pysim_requirements.txt (line 15)) (25.0) #20 13.57 Collecting six (from smpplib==2.1.0) #20 13.58 Downloading six-1.17.0-py2.py3-none-any.whl.metadata (1.7 kB) #20 13.65 Collecting pyparsing>=3.0.6 (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #20 13.66 Downloading pyparsing-3.3.3-py3-none-any.whl.metadata (5.9 kB) #20 13.74 Collecting bitstruct (from asn1tools==0.166.0->-r /tmp/pysim_requirements.txt (line 14)) #20 13.75 Downloading bitstruct-8.23.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (7.3 kB) #20 13.81 Collecting Twisted~=23.10.0 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 13.81 Downloading twisted-23.10.0-py3-none-any.whl.metadata (9.5 kB) #20 13.97 Collecting smpp.pdu3~=0.4 (from smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 13.99 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl.metadata (929 bytes) #20 14.04 Collecting pyperclip>=1.8.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #20 14.05 Downloading pyperclip-1.11.0-py3-none-any.whl.metadata (2.4 kB) #20 14.13 Collecting rich>=15.0.0 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #20 14.14 Downloading rich-15.0.0-py3-none-any.whl.metadata (18 kB) #20 14.20 Collecting rich-argparse>=1.7.2 (from cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #20 14.21 Downloading rich_argparse-1.8.0-py3-none-any.whl.metadata (15 kB) #20 14.27 Collecting attrs>=21.3.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.28 Downloading attrs-26.1.0-py3-none-any.whl.metadata (8.8 kB) #20 14.34 Collecting automat>=0.8.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.35 Downloading automat-25.4.16-py3-none-any.whl.metadata (8.4 kB) #20 14.42 Collecting constantly>=15.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.43 Downloading constantly-23.10.4-py3-none-any.whl.metadata (1.8 kB) #20 14.50 Collecting hyperlink>=17.1.1 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.51 Downloading hyperlink-21.0.0-py2.py3-none-any.whl.metadata (1.5 kB) #20 14.56 Collecting incremental>=22.10.0 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.56 Downloading incremental-24.11.0-py3-none-any.whl.metadata (9.5 kB) #20 14.58 Requirement already satisfied: typing-extensions>=4.2.0 in /usr/lib/python3/dist-packages (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) (4.13.2) #20 14.66 Collecting zope-interface>=5 (from Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 14.67 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl.metadata (48 kB) #20 14.74 Collecting sphinxcontrib-applehelp>=1.0.7 (from sphinx) #20 14.75 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #20 14.81 Collecting sphinxcontrib-devhelp>=1.0.6 (from sphinx) #20 14.82 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #20 14.85 Collecting sphinxcontrib-htmlhelp>=2.0.6 (from sphinx) #20 14.86 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl.metadata (2.3 kB) #20 14.89 Collecting sphinxcontrib-jsmath>=1.0.1 (from sphinx) #20 14.89 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl.metadata (2.6 kB) #20 14.93 Collecting sphinxcontrib-qthelp>=1.0.6 (from sphinx) #20 14.94 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl.metadata (2.3 kB) #20 14.97 Collecting sphinxcontrib-serializinghtml>=1.1.9 (from sphinx) #20 14.98 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl.metadata (2.4 kB) #20 15.05 Collecting Jinja2>=3.1 (from sphinx) #20 15.05 Downloading jinja2-3.1.6-py3-none-any.whl.metadata (2.9 kB) #20 15.11 Collecting Pygments>=2.19 (from sphinx) #20 15.12 Downloading pygments-2.21.0-py3-none-any.whl.metadata (2.5 kB) #20 15.13 Requirement already satisfied: docutils<0.24,>=0.21 in /usr/lib/python3/dist-packages (from sphinx) (0.21.2) #20 15.15 Collecting snowballstemmer>=3.0.1 (from sphinx) #20 15.16 Downloading snowballstemmer-3.1.1-py3-none-any.whl.metadata (7.9 kB) #20 15.20 Collecting babel>=2.18 (from sphinx) #20 15.20 Downloading babel-2.18.0-py3-none-any.whl.metadata (2.2 kB) #20 15.27 Collecting alabaster>=1.0 (from sphinx) #20 15.28 Downloading alabaster-1.0.0-py3-none-any.whl.metadata (2.8 kB) #20 15.33 Collecting imagesize>=1.3 (from sphinx) #20 15.33 Downloading imagesize-2.0.1-py3-none-any.whl.metadata (7.0 kB) #20 15.38 Collecting requests>=2.32.5 (from sphinx) #20 15.39 Downloading requests-2.34.2-py3-none-any.whl.metadata (4.8 kB) #20 15.45 Collecting roman-numerals>=3.0 (from sphinx) #20 15.46 Downloading roman_numerals-4.1.0-py3-none-any.whl.metadata (3.3 kB) #20 15.53 Collecting pockets>=0.3 (from sphinxcontrib-napoleon) #20 15.54 Downloading pockets-0.9.1-py2.py3-none-any.whl.metadata (4.4 kB) #20 15.69 Collecting gsm0338 (from pyosmocom>=0.0.12->-r /tmp/pysim_requirements.txt (line 8)) #20 15.71 Downloading gsm0338-1.1.0-py3-none-any.whl.metadata (2.5 kB) #20 15.84 Collecting cffi>=2.0.0 (from cryptography->-r /tmp/pysim_requirements.txt (line 13)) #20 15.85 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl.metadata (2.5 kB) #20 15.92 Collecting pycparser (from cffi>=2.0.0->cryptography->-r /tmp/pysim_requirements.txt (line 13)) #20 15.93 Downloading pycparser-3.12-py3-none-any.whl.metadata (9.7 kB) #20 16.01 Collecting idna>=2.5 (from hyperlink>=17.1.1->Twisted~=23.10.0->smpp.twisted3@ git+https://github.com/jookies/smpp.twisted-%3E-r /tmp/pysim_requirements.txt (line 17)) #20 16.02 Downloading idna-3.20-py3-none-any.whl.metadata (7.2 kB) #20 16.06 Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3/dist-packages (from Jinja2>=3.1->sphinx) (2.1.5) #20 16.18 Collecting charset_normalizer<4,>=2 (from requests>=2.32.5->sphinx) #20 16.18 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl.metadata (46 kB) #20 16.26 Collecting urllib3<3,>=1.26 (from requests>=2.32.5->sphinx) #20 16.26 Downloading urllib3-2.8.0-py3-none-any.whl.metadata (7.4 kB) #20 16.32 Collecting certifi>=2023.5.7 (from requests>=2.32.5->sphinx) #20 16.33 Downloading certifi-2026.10.19-py3-none-any.whl.metadata (2.5 kB) #20 16.39 Collecting markdown-it-py>=2.2.0 (from rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #20 16.39 Downloading markdown_it_py-4.2.0-py3-none-any.whl.metadata (7.4 kB) #20 16.43 Collecting mdurl~=0.1 (from markdown-it-py>=2.2.0->rich>=15.0.0->cmd2<4.0,>=2.6.2->-r /tmp/pysim_requirements.txt (line 4)) #20 16.44 Downloading mdurl-0.1.2-py3-none-any.whl.metadata (1.6 kB) #20 16.50 Downloading cmd2-3.5.1-py3-none-any.whl (147 kB) #20 16.54 Downloading smpp.pdu3-0.6-py2.py3-none-any.whl (31 kB) #20 16.58 Downloading twisted-23.10.0-py3-none-any.whl (3.2 MB) #20 16.65 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 47.7 MB/s eta 0:00:00 #20 16.66 Downloading ruff-0.17.2-py3-none-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (10.5 MB) #20 16.79 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.5/10.5 MB 80.5 MB/s eta 0:00:00 #20 16.80 Downloading sphinx-9.2.0-py3-none-any.whl (3.9 MB) #20 16.86 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.9/3.9 MB 69.4 MB/s eta 0:00:00 #20 16.86 Downloading sphinxcontrib_napoleon-0.7-py2.py3-none-any.whl (17 kB) #20 16.88 Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB) #20 16.91 Downloading jsonpath_ng-1.12.0-py3-none-any.whl (80 kB) #20 16.93 Downloading construct-2.10.70-py3-none-any.whl (63 kB) #20 16.97 Downloading bidict-0.24.1-py3-none-any.whl (36 kB) #20 17.00 Downloading pyosmocom-0.0.12-py3-none-any.whl (32 kB) #20 17.03 Downloading termcolor-3.3.0-py3-none-any.whl (7.7 kB) #20 17.07 Downloading colorlog-6.12.0-py3-none-any.whl (12 kB) #20 17.11 Downloading pycryptodomex-3.24.1-cp37-abi3-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (2.3 MB) #20 17.17 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 MB 36.0 MB/s eta 0:00:00 #20 17.18 Downloading cryptography-50.0.2-cp311-abi3-manylinux_2_34_x86_64.whl (4.8 MB) #20 17.27 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.8/4.8 MB 57.8 MB/s eta 0:00:00 #20 17.28 Downloading alabaster-1.0.0-py3-none-any.whl (13 kB) #20 17.31 Downloading attrs-26.1.0-py3-none-any.whl (67 kB) #20 17.35 Downloading automat-25.4.16-py3-none-any.whl (42 kB) #20 17.38 Downloading babel-2.18.0-py3-none-any.whl (10.2 MB) #20 17.54 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.2/10.2 MB 61.5 MB/s eta 0:00:00 #20 17.55 Downloading cffi-2.1.1-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (221 kB) #20 17.61 Downloading constantly-23.10.4-py3-none-any.whl (13 kB) #20 17.64 Downloading hyperlink-21.0.0-py2.py3-none-any.whl (74 kB) #20 17.67 Downloading idna-3.20-py3-none-any.whl (69 kB) #20 17.71 Downloading imagesize-2.0.1-py3-none-any.whl (14 kB) #20 17.74 Downloading incremental-24.11.0-py3-none-any.whl (21 kB) #20 17.77 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) #20 17.81 Downloading pockets-0.9.1-py2.py3-none-any.whl (26 kB) #20 17.85 Downloading pygments-2.21.0-py3-none-any.whl (1.3 MB) #20 17.90 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 22.6 MB/s eta 0:00:00 #20 17.91 Downloading pyparsing-3.3.3-py3-none-any.whl (126 kB) #20 17.93 Downloading pyperclip-1.11.0-py3-none-any.whl (11 kB) #20 17.97 Downloading requests-2.34.2-py3-none-any.whl (73 kB) #20 18.00 Downloading charset_normalizer-3.5.2-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (254 kB) #20 18.04 Downloading urllib3-2.8.0-py3-none-any.whl (135 kB) #20 18.08 Downloading certifi-2026.10.19-py3-none-any.whl (136 kB) #20 18.12 Downloading rich-15.0.0-py3-none-any.whl (310 kB) #20 18.16 Downloading markdown_it_py-4.2.0-py3-none-any.whl (91 kB) #20 18.19 Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) #20 18.23 Downloading rich_argparse-1.8.0-py3-none-any.whl (25 kB) #20 18.26 Downloading roman_numerals-4.1.0-py3-none-any.whl (7.7 kB) #20 18.30 Downloading six-1.17.0-py2.py3-none-any.whl (11 kB) #20 18.34 Downloading snowballstemmer-3.1.1-py3-none-any.whl (104 kB) #20 18.37 Downloading sphinxcontrib_applehelp-2.0.0-py3-none-any.whl (119 kB) #20 18.41 Downloading sphinxcontrib_devhelp-2.0.0-py3-none-any.whl (82 kB) #20 18.45 Downloading sphinxcontrib_htmlhelp-2.1.0-py3-none-any.whl (98 kB) #20 18.48 Downloading sphinxcontrib_jsmath-2.0.0-py3-none-any.whl (78 kB) #20 18.51 Downloading sphinxcontrib_qthelp-2.0.0-py3-none-any.whl (88 kB) #20 18.54 Downloading sphinxcontrib_serializinghtml-2.0.0-py3-none-any.whl (92 kB) #20 18.58 Downloading zope_interface-8.7-cp313-cp313-manylinux1_x86_64.manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_5_x86_64.whl (283 kB) #20 18.62 Downloading bitstruct-8.23.0-cp313-cp313-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (82 kB) #20 18.66 Downloading gsm0338-1.1.0-py3-none-any.whl (5.8 kB) #20 18.70 Downloading pycparser-3.12-py3-none-any.whl (62 kB) #20 18.79 Building wheels for collected packages: lcov_cobertura, sphinx-argparse, smpplib, asn1tools, smpp.pdu, smpp.twisted3, pyscard, pytlv #20 18.79 Building wheel for lcov_cobertura (pyproject.toml): started #20 18.91 Building wheel for lcov_cobertura (pyproject.toml): finished with status 'done' #20 18.91 Created wheel for lcov_cobertura: filename=lcov_cobertura-2.0.2-py3-none-any.whl size=11716 sha256=08ed119461cb504762edb5389cdf927296b2baa4ab89e7a05155d935c70f9c15 #20 18.91 Stored in directory: /root/.cache/pip/wheels/b9/a4/13/8f640a807038bb8924745d8e57cbd8b4034170f7f9788ffab8 #20 18.91 Building wheel for sphinx-argparse (pyproject.toml): started #20 19.02 Building wheel for sphinx-argparse (pyproject.toml): finished with status 'done' #20 19.02 Created wheel for sphinx-argparse: filename=sphinx_argparse-0.4.0-py3-none-any.whl size=12719 sha256=2ccb4f10154d8aecaf8bc6e9538ead16663dfea67fc35eb24ba0cf5c52550b6d #20 19.02 Stored in directory: /tmp/pip-ephem-wheel-cache-brfuk3gy/wheels/73/b7/19/d26631b7ef1c14ec1e1ab5e03c0cbd994720ce53e99f41792e #20 19.02 DEPRECATION: Building 'smpplib' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpplib'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #20 19.02 Building wheel for smpplib (setup.py): started #20 19.15 Building wheel for smpplib (setup.py): finished with status 'done' #20 19.15 Created wheel for smpplib: filename=smpplib-2.1.0-py3-none-any.whl size=29013 sha256=888cb1a14569c3b922da34729a536c712b4c0d63b2e7e8e835e3889f4b1704aa #20 19.15 Stored in directory: /tmp/pip-ephem-wheel-cache-brfuk3gy/wheels/c7/1f/00/8310d8f80e9235411f5c532fa8639d4e8a55d6c60ce2f719e1 #20 19.15 DEPRECATION: Building 'asn1tools' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'asn1tools'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #20 19.15 Building wheel for asn1tools (setup.py): started #20 19.30 Building wheel for asn1tools (setup.py): finished with status 'done' #20 19.30 Created wheel for asn1tools: filename=asn1tools-0.166.0-py3-none-any.whl size=119785 sha256=77eb2229d7ac9aaddbc939fde768973190c6b1321e8654b3d2ed6340ebd37be0 #20 19.30 Stored in directory: /tmp/pip-ephem-wheel-cache-brfuk3gy/wheels/2f/48/f7/6b02e94c4a617fd3401d48992f12efefb61549179aeaea7ba5 #20 19.30 DEPRECATION: Building 'smpp.pdu' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.pdu'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #20 19.30 Building wheel for smpp.pdu (setup.py): started #20 19.43 Building wheel for smpp.pdu (setup.py): finished with status 'done' #20 19.43 Created wheel for smpp.pdu: filename=smpp_pdu-0.3-py3-none-any.whl size=31755 sha256=ae144fc00d98067975ff8553f8fbc822673245709c7c3f54c80389a13bf344fa #20 19.43 Stored in directory: /tmp/pip-ephem-wheel-cache-brfuk3gy/wheels/ec/59/c8/1689acefa6165ca4c187514c7119267ae941b1075c4f9d7fee #20 19.43 DEPRECATION: Building 'smpp.twisted3' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'smpp.twisted3'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #20 19.43 Building wheel for smpp.twisted3 (setup.py): started #20 19.55 Building wheel for smpp.twisted3 (setup.py): finished with status 'done' #20 19.55 Created wheel for smpp.twisted3: filename=smpp_twisted3-0.8-py3-none-any.whl size=17529 sha256=c379ebb22e90a674a366d18e42efc247594b05d21c0dc5a5e9644c2bdf59338a #20 19.55 Stored in directory: /tmp/pip-ephem-wheel-cache-brfuk3gy/wheels/d7/df/1e/ec5213d7c625fee8bc3ed25a094b2da2e711989dcf777efeac #20 19.55 Building wheel for pyscard (pyproject.toml): started #20 20.68 Building wheel for pyscard (pyproject.toml): finished with status 'done' #20 20.68 Created wheel for pyscard: filename=pyscard-2.3.1-cp313-cp313-linux_x86_64.whl size=243937 sha256=8b422c0d937a6ebb3ea95f527b07d70a9d4be7caaf3034d4bf5e568d80ec85c1 #20 20.68 Stored in directory: /root/.cache/pip/wheels/82/bb/ae/d47c99a6ef7eb01a71857e66a2b51e63f56e84ab418fc7952d #20 20.68 DEPRECATION: Building 'pytlv' using the legacy setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `pyproject.toml` file to the source tree of 'pytlv'. Discussion can be found at https://github.com/pypa/pip/issues/6334 #20 20.68 Building wheel for pytlv (setup.py): started #20 20.81 Building wheel for pytlv (setup.py): finished with status 'done' #20 20.81 Created wheel for pytlv: filename=pytlv-0.71-py2.py3-none-any.whl size=16606 sha256=f4565678a816ff227c96c10b7b990c57f4de716f747f0dc0320433afaea51403 #20 20.81 Stored in directory: /root/.cache/pip/wheels/ef/7c/d8/e0f4af40e0231f40f63199f2bf7014ad923f3e01f744324f4d #20 20.81 Successfully built lcov_cobertura sphinx-argparse smpplib asn1tools smpp.pdu smpp.twisted3 pyscard pytlv #20 20.88 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 #20 21.97 Attempting uninstall: Pygments #20 21.98 Found existing installation: Pygments 2.18.0 #20 21.98 error: uninstall-no-record-file #20 21.98 #20 21.98 × Cannot uninstall Pygments 2.18.0 #20 21.98 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. #20 21.98 #20 21.98 hint: The package was installed by debian. You should check if it can uninstall the package. #20 21.98 #20 ERROR: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 ------
[ 8/18] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' 'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' 'git+https://github.com/podshumok/python-smpplib.git' 'ruff' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt:
20.88 Installing collected packages: smpp.pdu3, smpp.pdu, pytlv, pyserial, pyperclip, zope-interface, urllib3, termcolor, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, snowballstemmer, six, ruff, roman-numerals, pyscard, pyparsing, Pygments, pycryptodomex, pycparser, mdurl, lcov_cobertura, jsonpath-ng, Jinja2, incremental, imagesize, idna, gsm0338, construct, constantly, colorlog, charset_normalizer, certifi, bitstruct, bidict, babel, automat, attrs, alabaster, smpplib, requests, pyosmocom, pockets, markdown-it-py, hyperlink, cffi, asn1tools, Twisted, sphinxcontrib-napoleon, sphinx, rich, cryptography, sphinx-argparse, smpp.twisted3, rich-argparse, cmd2 21.97 Attempting uninstall: Pygments 21.98 Found existing installation: Pygments 2.18.0 21.98 error: uninstall-no-record-file 21.98 21.98 × Cannot uninstall Pygments 2.18.0 21.98 ╰─> The package's contents are unknown: no RECORD file was found for Pygments. 21.98 21.98 hint: The package was installed by debian. You should check if it can uninstall the package. 21.98 ------ ERROR: failed to solve: process "/bin/sh -c set -x && \tcat /tmp/pysim_requirements.txt && \tpip3 install --break-system-packages \t\t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git@028da3798355d0260c6c6491...' \t\t'git+https://github.com/osmocom/sphinx-argparse@inside-classes#egg=sphinx-argpars...' \t\t'git+https://github.com/podshumok/python-smpplib.git' \t\t'ruff' \t\t'sphinx' \t\t'sphinxcontrib-napoleon' \t\t-r /tmp/pysim_requirements.txt" did not complete successfully: exit code: 1 make: *** [../make/Makefile:97: docker-build] Error 1 make: Leaving directory 'https://jenkins.osmocom.org/jenkins/job/nplab-sua-test/ws/debian-trixie-build' + exit 1 + RC=1 + uptime + grep --color=always -o load.* [01;31m[Kload average: 2.92, 2.83, 2.03[m[K + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?