laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/31331 ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: l1ctl_proto.h: explicitly assign message type values ...................................................................... l1ctl_proto.h: explicitly assign message type values Explicit is better than implicit. Having the message type values assigned explicitly allows rearranging messages in the middle without affecting the message type values following them. Change-Id: I1ec32289a24c5704ea0676b508cb12ee0b4890d7 --- M include/l1ctl_proto.h 1 file changed, 50 insertions(+), 40 deletions(-) Approvals: pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved Jenkins Builder: Verified diff --git a/include/l1ctl_proto.h b/include/l1ctl_proto.h index a15f905..7e415e9 100644 --- a/include/l1ctl_proto.h +++ b/include/l1ctl_proto.h @@ -21,48 +21,45 @@ #define __L1CTL_PROTO_H__ enum { - _L1CTL_NONE = 0, - L1CTL_FBSB_REQ, - L1CTL_FBSB_CONF, - L1CTL_DATA_IND, - L1CTL_RACH_REQ, - L1CTL_DM_EST_REQ, - L1CTL_DATA_REQ, - L1CTL_RESET_IND, - L1CTL_PM_REQ, /* power measurement */ - L1CTL_PM_CONF, /* power measurement */ - L1CTL_ECHO_REQ, - L1CTL_ECHO_CONF, - L1CTL_RACH_CONF, - L1CTL_RESET_REQ, - L1CTL_RESET_CONF, - L1CTL_DATA_CONF, - L1CTL_CCCH_MODE_REQ, - L1CTL_CCCH_MODE_CONF, - L1CTL_DM_REL_REQ, - L1CTL_PARAM_REQ, - L1CTL_DM_FREQ_REQ, - L1CTL_CRYPTO_REQ, - L1CTL_SIM_REQ, - L1CTL_SIM_CONF, - L1CTL_TCH_MODE_REQ, - L1CTL_TCH_MODE_CONF, - L1CTL_NEIGH_PM_REQ, - L1CTL_NEIGH_PM_IND, - L1CTL_TRAFFIC_REQ, - L1CTL_TRAFFIC_CONF, - L1CTL_TRAFFIC_IND, - L1CTL_BURST_IND, - + _L1CTL_NONE = 0x00, + L1CTL_FBSB_REQ = 0x01, + L1CTL_FBSB_CONF = 0x02, + L1CTL_DATA_IND = 0x03, + L1CTL_RACH_REQ = 0x04, + L1CTL_DM_EST_REQ = 0x05, + L1CTL_DATA_REQ = 0x06, + L1CTL_RESET_IND = 0x07, + L1CTL_PM_REQ = 0x08, /* power measurement */ + L1CTL_PM_CONF = 0x09, /* power measurement */ + L1CTL_ECHO_REQ = 0x0a, + L1CTL_ECHO_CONF = 0x0b, + L1CTL_RACH_CONF = 0x0c, + L1CTL_RESET_REQ = 0x0d, + L1CTL_RESET_CONF = 0x0e, + L1CTL_DATA_CONF = 0x0f, + L1CTL_CCCH_MODE_REQ = 0x10, + L1CTL_CCCH_MODE_CONF = 0x11, + L1CTL_DM_REL_REQ = 0x12, + L1CTL_PARAM_REQ = 0x13, + L1CTL_DM_FREQ_REQ = 0x14, + L1CTL_CRYPTO_REQ = 0x15, + L1CTL_SIM_REQ = 0x16, + L1CTL_SIM_CONF = 0x17, + L1CTL_TCH_MODE_REQ = 0x18, + L1CTL_TCH_MODE_CONF = 0x19, + L1CTL_NEIGH_PM_REQ = 0x1a, + L1CTL_NEIGH_PM_IND = 0x1b, + L1CTL_TRAFFIC_REQ = 0x1c, + L1CTL_TRAFFIC_CONF = 0x1d, + L1CTL_TRAFFIC_IND = 0x1e, + L1CTL_BURST_IND = 0x1f, /* configure TBF for uplink/downlink */ - L1CTL_TBF_CFG_REQ, - L1CTL_TBF_CFG_CONF, - - L1CTL_DATA_TBF_REQ, - L1CTL_DATA_TBF_CONF, - + L1CTL_TBF_CFG_REQ = 0x20, + L1CTL_TBF_CFG_CONF = 0x21, + L1CTL_DATA_TBF_REQ = 0x22, + L1CTL_DATA_TBF_CONF = 0x23, /* Extended (11-bit) RACH (see 3GPP TS 05.02, section 5.2.7) */ - L1CTL_EXT_RACH_REQ, + L1CTL_EXT_RACH_REQ = 0x24, }; enum ccch_mode { -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/31331 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: I1ec32289a24c5704ea0676b508cb12ee0b4890d7 Gerrit-Change-Number: 31331 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged