Hoernchen has submitted this change. ( https://gerrit.osmocom.org/c/osmo-trx/+/32942 ) Change subject: ms: fix the gain init for blade ...................................................................... ms: fix the gain init for blade Change-Id: Ic5a25d6f5606fba599b8144fbec7285047dca3c9 --- M Transceiver52M/ms/bladerf_specific.h 1 file changed, 12 insertions(+), 5 deletions(-) Approvals: pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/Transceiver52M/ms/bladerf_specific.h b/Transceiver52M/ms/bladerf_specific.h index e1e8cc6..78c51ab 100644 --- a/Transceiver52M/ms/bladerf_specific.h +++ b/Transceiver52M/ms/bladerf_specific.h @@ -222,7 +222,7 @@ { close_device(); } - blade_hw() : rxFullScale(2047), txFullScale(2047), rxtxdelay(-60) + blade_hw() : rxFullScale(2047), txFullScale(2047), rxtxdelay(-60), rxgain(30), txgain(30) { } @@ -290,8 +290,8 @@ (bladerf_bandwidth *)NULL); blade_check(bladerf_set_gain_mode, dev, BLADERF_CHANNEL_RX(0), BLADERF_GAIN_MGC); - blade_check(bladerf_set_gain, dev, BLADERF_CHANNEL_RX(0), (bladerf_gain)30); - blade_check(bladerf_set_gain, dev, BLADERF_CHANNEL_TX(0), (bladerf_gain)30); + setRxGain(rxgain, 0); + setTxGain(txgain, 0); usleep(1000); blade_check(bladerf_enable_module, dev, BLADERF_MODULE_RX, true); usleep(1000); @@ -308,8 +308,6 @@ buf_mgmt.bufptrqueue.spsc_push(&cur_buffer[i]); } - setRxGain(20); - setTxGain(30); usleep(1000); -- To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/32942 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-trx Gerrit-Branch: master Gerrit-Change-Id: Ic5a25d6f5606fba599b8144fbec7285047dca3c9 Gerrit-Change-Number: 32942 Gerrit-PatchSet: 2 Gerrit-Owner: Hoernchen <ewild@sysmocom.de> Gerrit-Reviewer: Hoernchen <ewild@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge@osmocom.org> Gerrit-Reviewer: pespin <pespin@sysmocom.de> Gerrit-MessageType: merged