osmith has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/43075?usp=email )
Change subject: debian-buster-jenkins*: remove ......................................................................
debian-buster-jenkins*: remove
We are clearly not using these containers anymore, as they fail to build:
0.297 Err:4 http://deb.debian.org/debian buster Release 0.297 404 Not Found [IP: 199.232.190.132 80] 0.305 Err:5 http://deb.debian.org/debian-security buster/updates Release 0.305 404 Not Found [IP: 199.232.190.132 80] 0.314 Err:6 http://deb.debian.org/debian buster-updates Release 0.314 404 Not Found [IP: 199.232.190.132 80] 0.320 Reading package lists... 0.334 E: The repository 'http://deb.debian.org/debian buster Release' does not have a Release file. 0.334 E: The repository 'http://deb.debian.org/debian-security buster/updates Release' does not have a Release file. 0.334 E: The repository 'http://deb.debian.org/debian buster-updates Release' does not have a Release file.
Change-Id: Ia7fc6aac738738c1a3929ad92ae93d0f2d6a825d --- D debian-buster-jenkins-arm/Dockerfile D debian-buster-jenkins-arm/Makefile D debian-buster-jenkins/Dockerfile D debian-buster-jenkins/Makefile 4 files changed, 0 insertions(+), 295 deletions(-)
Approvals: daniel: Looks good to me, but someone else must approve fixeria: Looks good to me, approved Jenkins Builder: Verified
diff --git a/debian-buster-jenkins-arm/Dockerfile b/debian-buster-jenkins-arm/Dockerfile deleted file mode 100644 index c918b15..0000000 --- a/debian-buster-jenkins-arm/Dockerfile +++ /dev/null @@ -1,78 +0,0 @@ -# Image used to run contrib/jenkins.sh scripts of a few Osmocom projects on -# arm. Keep this image minimal so the rpis don't need forever to build it. -# See master-builds.yml, gerrit-verifications.yml in osmo-ci.git. - -ARG DEBIAN_VERSION=buster-slim -ARG REGISTRY=docker.io -FROM ${REGISTRY}/debian:${DEBIAN_VERSION} -# Arguments used after FROM must be specified again -ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" -ARG OSMOCOM_REPO_PATH="packages/osmocom:" - -# Install apt dependencies (keep in alphabetic order) -RUN \ - DEBIAN_FRONTEND=noninteractive apt-get update && \ - DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \ - autoconf \ - automake \ - bzip2 \ - ca-certificates \ - ccache \ - g++ \ - gcc \ - git \ - libboost-dev \ - libboost-filesystem-dev \ - libboost-program-options-dev \ - libboost-thread-dev \ - libfftw3-dev \ - libgnutls28-dev \ - libmnl-dev \ - libortp-dev \ - libpcsclite-dev \ - libsctp-dev \ - libtalloc-dev \ - libtool \ - libusb-1.0-0-dev \ - make \ - pkg-config \ - python3-minimal \ - python3-setuptools \ - sdcc \ - stow \ - && \ - apt-get clean - -# match the outside user -RUN useradd --uid=1000 build - -RUN mkdir /build -RUN chown build:build /build - -# Install osmo-python-tests for python3 -ADD https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/master... /tmp/osmo-python-tests-commit -RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests3 && \ - cd osmo-python-tests3 && \ - python3 setup.py clean build install - -# Install osmo-ci.git/scripts to /usr/local/bin -ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT /tmp/osmo-ci-commit -RUN git clone https://gerrit.osmocom.org/osmo-ci osmo-ci && \ - cp -v $(find osmo-ci/scripts \ - -maxdepth 1 \ - -type f ) \ - /usr/local/bin - -# Install packages from Osmocom OBS repositories: -# * osmo-trx: liblimesuite-dev, libuhd-dev -ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/nightly/Debian_10/" -COPY .common/Release.key /etc/apt/trusted.gpg.d/obs.osmocom.org.asc -RUN echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] " \ - $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-nightly.list -ADD $OSMOCOM_REPO/Release /tmp/Release -RUN apt-get update && \ - apt-get install -y --no-install-recommends \ - liblimesuite-dev \ - libuhd-dev \ - && \ - apt-get clean diff --git a/debian-buster-jenkins-arm/Makefile b/debian-buster-jenkins-arm/Makefile deleted file mode 100644 index c63bf12..0000000 --- a/debian-buster-jenkins-arm/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -UPSTREAM_DISTRO=debian/eol:buster-slim -DISTRO=debian-buster-slim -include ../make/Makefile diff --git a/debian-buster-jenkins/Dockerfile b/debian-buster-jenkins/Dockerfile deleted file mode 100644 index f0bb6c7..0000000 --- a/debian-buster-jenkins/Dockerfile +++ /dev/null @@ -1,211 +0,0 @@ -# osmo-gsm-tester is still using this (OS#6126). -# See master-builds.yml, gerrit-verifications.yml in osmo-ci.git. - -ARG DEBIAN_VERSION=buster -ARG REGISTRY=docker.io -FROM ${REGISTRY}/debian:${DEBIAN_VERSION} -# Arguments used after FROM must be specified again -ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" -ARG OSMOCOM_REPO_PATH="packages/osmocom:" - -# Make "$DEBIAN_VERSION" available after FROM -# https://docs.docker.com/engine/reference/builder/#understand-how-arg-and-fro... -ARG DEBIAN_VERSION - -# LLVM-embedded-toolchain-for-Arm version -ARG LLVM_VERSION="14.0.0" - -# Install apt dependencies (keep in alphabetic order) -RUN \ - [ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; \ - DEBIAN_FRONTEND=noninteractive apt-get update && \ - DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && \ - DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends \ - asciidoc \ - asciidoc-dblatex \ - autoconf \ - autoconf-archive \ - automake \ - bc \ - bison \ - bzip2 \ - ca-certificates \ - ccache \ - cmake \ - coccinelle \ - cppcheck \ - dahdi-source \ - dblatex \ - dbus \ - debhelper \ - devscripts \ - dh-autoreconf \ - dh-systemd \ - docbook5-xml \ - doxygen \ - flex \ - g++ \ - gawk \ - gcc \ - gcc-arm-none-eabi \ - ghostscript \ - git \ - git-buildpackage \ - graphviz \ - htop \ - inkscape \ - latexmk \ - lcov \ - libaio-dev \ - libasound2-dev \ - libboost-all-dev \ - libc-ares-dev \ - libcsv-dev \ - libdbd-sqlite3 \ - libdbi-dev \ - libelf-dev \ - libffi-dev \ - libfftw3-dev \ - libgmp-dev \ - libgnutls28-dev \ - libgps-dev \ - libgsm1-dev \ - libjansson-dev \ - liblua5.3-dev \ - libmnl-dev \ - libncurses5-dev \ - libnewlib-arm-none-eabi \ - libnl-3-dev \ - libnl-route-3-dev \ - liboping-dev \ - libortp-dev \ - libpcap-dev \ - libpcsclite-dev \ - libreadline-dev \ - libsctp-dev \ - libsigsegv-dev \ - libsnmp-dev \ - libsofia-sip-ua-glib-dev \ - libsqlite3-dev \ - libssl-dev \ - libtalloc-dev \ - libtinfo5 \ - libtool \ - libusb-1.0-0-dev \ - libusb-dev \ - libxml2-utils \ - libzmq3-dev \ - locales \ - lua-socket \ - make \ - mscgen \ - ofono \ - openssh-client \ - osc \ - patchelf \ - pkg-config \ - pylint \ - python-pip \ - python-setuptools \ - python-yaml \ - python2.7 \ - python3 \ - python3-cryptography \ - python3-gi \ - python3-mako \ - python3-nwdiag \ - python3-pip \ - python3-pyflakes \ - python3-setuptools \ - python3-usb \ - python3-yaml \ - rsync \ - sdcc \ - source-highlight \ - sqlite3 \ - stow \ - sudo \ - systemd \ - tcpdump \ - tex-gyre \ - texinfo \ - unzip \ - wget \ - xsltproc - -RUN set -x && \ - [ "$(arch)" = "x86_64" ] || exit 0; \ - wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/dow... && \ - tar -xf LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && \ - rm LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && \ - mv LLVMEmbeddedToolchainForArm-${LLVM_VERSION} /opt/llvm-arm && \ - /opt/llvm-arm/bin/clang --version && \ - /opt/llvm-arm/bin/clang --print-targets - -# Install pip dependencies (keep in alphabetic order) -RUN pip3 install \ - 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \ - 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' \ - 'git+https://github.com/podshumok/python-smpplib.git' \ - 'pydbus' \ - 'pysispm' \ - 'sphinx' \ - 'sphinxcontrib-napoleon' \ - 'swig' - -# match the outside user -RUN useradd --uid=1000 build -#RUN echo "build ALL=(ALL) NOPASSWD:ALL" > /etc/sudoers.d/build - -RUN mkdir /build -RUN chown build:build /build - -# Install osmo-python-tests for python2 (when building old tags again new releases) -ARG OSMO_PYTHON2_TESTS_COMMIT=fb4b813d4df62b7b2445bdced961eb1847267eed -RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests2 && \ - cd osmo-python-tests2 && \ - git checkout $OSMO_PYTHON2_TESTS_COMMIT && \ - python2 setup.py clean build install - -# Install osmo-python-tests for python3 -ADD https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/master... /tmp/osmo-python-tests-commit -RUN git clone https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests3 && \ - cd osmo-python-tests3 && \ - python3 setup.py clean build install - -# Install osmo-ci.git/scripts to /usr/local/bin -ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT /tmp/osmo-ci-commit -RUN git clone https://gerrit.osmocom.org/osmo-ci osmo-ci && \ - cp -v $(find osmo-ci/scripts \ - -maxdepth 1 \ - -type f ) \ - /usr/local/bin - -# Install osmo-gsm-manuals to /opt/osmo-gsm-manuals -ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format=... /tmp/osmo-gsm-manuals-commit -RUN git -C /opt clone https://gerrit.osmocom.org/osmo-gsm-manuals - -# Set a UTF-8 locale -RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && \ - dpkg-reconfigure --frontend=noninteractive locales && \ - update-locale LANG=en_US.UTF-8 -ENV LANG en_US.UTF-8 - -# Install packages from Osmocom OBS repositories: -# * osmo-remsim: libulfius -# * osmo-trx: liblimesuite-dev, libuhd-dev -ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/nightly/Debian_10/" -COPY .common/Release.key /tmp/Release.key -RUN apt-key add /tmp/Release.key && \ - rm /tmp/Release.key && \ - echo "deb " $OSMOCOM_REPO " ./" > /etc/apt/sources.list.d/osmocom-nightly.list -ADD $OSMOCOM_REPO/Release /tmp/Release -RUN apt-get update && \ - apt-get install -y --no-install-recommends \ - liblimesuite-dev \ - libuhd-dev \ - libulfius-dev && \ - apt-get clean - -# osmo-python-tests' contrib/jenkins.sh writes to /usr/local as user -RUN chown -R build:build /usr/local diff --git a/debian-buster-jenkins/Makefile b/debian-buster-jenkins/Makefile deleted file mode 100644 index 8fd0302..0000000 --- a/debian-buster-jenkins/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -UPSTREAM_DISTRO=debian/eol:buster -DISTRO=debian-buster -include ../make/Makefile