Attention is currently required from: pespin. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-hnbgw/+/33178 to look at the new patch set (#5). Change subject: cfg: add 'hnbgw' / 'plmn MCC MNC' ...................................................................... cfg: add 'hnbgw' / 'plmn MCC MNC' According to 3GPP TS 25.413 8.26.2.2, "The RNC shall include the Global RNC-ID IE in the RESET message." To be able to do that, osmo-hnbgw needs to know the local PLMN. Introduce explicit knowledge of the local PLMN by config, and use this configured local PLMN in places where the local PLMN was so far derived otherwise. Subsequent patches will separately add the RNC-ID to the RANAP RESET messages. Since the PLMN is required to send correct RESET and RESET ACK, include the new 'plmn' config item in all example configurations. Related: SYS#6441 Change-Id: If404c3859acdfba274c719c7cb7d16f97d831a2a --- M doc/examples/osmo-hnbgw/osmo-hnbgw-cnpool.cfg M doc/examples/osmo-hnbgw/osmo-hnbgw-cs7.cfg M doc/examples/osmo-hnbgw/osmo-hnbgw-pfcp.cfg M doc/examples/osmo-hnbgw/osmo-hnbgw.cfg M include/osmocom/hnbgw/hnbgw.h M src/osmo-hnbgw/hnbgw.c M src/osmo-hnbgw/hnbgw_l3.c M src/osmo-hnbgw/hnbgw_vty.c M tests/osmo-hnbgw.vty 9 files changed, 115 insertions(+), 6 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-hnbgw refs/changes/78/33178/5 -- To view, visit https://gerrit.osmocom.org/c/osmo-hnbgw/+/33178 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-hnbgw Gerrit-Branch: master Gerrit-Change-Id: If404c3859acdfba274c719c7cb7d16f97d831a2a Gerrit-Change-Number: 33178 Gerrit-PatchSet: 5 Gerrit-Owner: neels <nhofmeyr@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: pespin <pespin@sysmocom.de> Gerrit-Attention: pespin <pespin@sysmocom.de> Gerrit-MessageType: newpatchset