Hello everybody,
I bought several Pirelli DP-L10. I checked out the master branch of
Osmocom, changed the console.h and sercomm.h, and enabled the
CONFIG_TX_ENABLE option. The code compiled successfully. I loaded the
compiled firmware onto the Pirelli with osmocon, and after it loaded, I ran
cell_log and mobile. But the phone never syncs to a cell.
I first tried with the "no stick" option. But after this, I tried to find a
strong cell (I used a Blackberry 9300 for this, it has a nice engineering
screen). I found cells from -76 dbm to -104 dbm. I tried them all with
the "stick xxx" option, but still, the phone does not sync to this cells.
The last thing I tried was using the binaries a friend provided me. He
compiled the code on his computer, he tested those binaries at his home,
with his Pirelli, and it worked: he could sync. He sent me those same
binaries, but still no luck, the phone cannot sync.
I have tried this on 4 different computers, 2 different versions of Ubuntu,
on Debian, and on a Mac. It doesn't seem it's an operating system problem,
but I wanted to test it anyway. The only thing it's different from you
it's I live in the Caribbean, but I have GSM networks on all four bands.
Now, if I use my sim on the Pirelli, with the original firmware, it works.
I can even make a call, so I think it's not a hardware problem. I tested
with Nokia C118 on a 850Mhz network, but same story.
I'm posting my mobile.cfg file, and some logs.
Thank you for your help.
Show replies by date