...a never ending story: i have a working ftdi-ttl, but the cp2102-adapters
(
http://www.ebay.de/itm/USB-2-0-to-TTL-UART-6PIN-CP2102-Module-Serial-Conver…)
with the same cable dont work under ubuntu or windows. if i rub the top of
the 2.55mm with my finger random data appears. but the loader doesnt upload
the firmware. i used the txd, rxd and gnd pins and checked the connections
with a multimeter. i tested -m c123xor, -m c123 and the default firmware.
flashing custom baudrates was no problem. drivers are installed correctly
(stady ttyusb0 under ubuntu/ com1 under win). is there any hint?
--
View this message in context:
http://baseband-devel.722152.n3.nabble.com/cp2102-betemcu-B75937-tp3489323p…
Sent from the baseband-devel mailing list archive at
Nabble.com.