5 Jun
2017
5 Jun
'17
9:14 a.m.
Hi,
Which USB-TTL converter do you use?
What is the output of PuTTY and mincom? Post it here.
Try using -m c123 instead of -m c123xor
KR,
Anton
2017-06-05 8:30 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
HI again,
I replaced my ttl converter, now my phone is able to communicate via
serial port but osmocon is unable to write hello world binary. The output
of following command is given
$ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/
compal_e88/hello_world.compalram.bin
output:
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f7 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 3 bytes from modem, data looks like: 82 bf 7d ..}
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f7 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fb .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fb .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f7 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: ff .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f7 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: f7 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: fb .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: fd .
got 1 bytes from modem, data looks like: 7f .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: 0a .
got 1 bytes from modem, data looks like: 3a :
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: da .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
and output on putty is unreadable. Kindly guide me what's wrong and how
can it be fixed.
Thanks
On Thu, Jun 1, 2017 at 12:39 PM, Anton Gorbachev <antgorka(a)gmail.com>
wrote:
If you cannot get @ftmtoolerror with minicom then
your jack is NOT
working or your TTL converter is broken (was burnt during soldering?:)
If you have another OS (e.g. Windows machine) you can put the device in
the PC, find out which serial line it is using,
run PuTTY, set Destination to Serial, COM9 (or what you find out),
speed 115200, connect.
Then push the power button on motorola, you must see @ftmtoolerror there.
If not, try another jack, another TTL converter, remove phone plastic case
as I told already..
No more ideas :)
KR,
Anton
2017-06-01 10:27 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
Oh okay. The headphone jack is working fine, i
have tested it. And
helloworld isn't working. Can you tell some other method to test phones
connectivity with my system.
On Thu, Jun 1, 2017 at 12:16 PM, Anton Gorbachev <antgorka(a)gmail.com>
wrote:
Hi,
Check the picture
https://osmocom.org/attachments/download/2091/motorola_c123_
hello_world.jpg
I mean the outer plastic case of the phone may not allow your jack to
be inserted at the whole length to thoe whole even if it looks like OK.
It depends on your jack case shape.
KR,
Anton
2017-06-01 9:57 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
> Hi,
>
> Thanks for replying back.
>
> I am not using virtualized environment. No success with minicom test.
> What exactly do you mean by jack is being plugged on the whole length, i
> didn't get it.
>
>
> On Thu, Jun 1, 2017 at 11:16 AM, Anton Gorbachev <antgorka(a)gmail.com>
> wrote:
>
>> Hi,
>>
>> Are you sure the jack is being plugged on the whole length?
>> Did you get success with minicom test?
>> I would recommend you to disassemble phone and check whether the jack
>> plugged an the whole length.
>> Do you use virtualized OS or normal? If virtualized, try to play with
>> the settings.
>>
>> KR,
>> Anton
>>
>> 2017-06-01 7:30 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
>>
>>> Hi,
>>>
>>> I am trying to write osmocombb to Motorolla c118 phone by following
>>> the given [1] guide.I have successfully compiled firmware binaries but
>>> having issues while writing them to phone.
>>>
>>> I connected motorolla c118 via USB Serial To RS232 TTL to 2.5mm
>>> audio jack, using the given guide [2]
>>>
>>> When I run this command
>>>
>>> $ dmesg | grep tty
>>>
>>> I get the following output
>>>
>>> [ 0.000000] console [tty0] enabled
>>> [ 14.946936] usb 3-6: pl2303 converter now attached to ttyUSB0
>>> [ 973.747957] pl2303 ttyUSB0: pl2303 converter now disconnected
>>> from ttyUSB0
>>> [ 1484.595816] usb 3-6: pl2303 converter now attached to ttyUSB0
>>> [ 1845.344494] pl2303 ttyUSB0: pl2303 converter now disconnected
>>> from ttyUSB0
>>> [ 2643.566407] usb 3-6: pl2303 converter now attached to ttyUSB1
>>>
>>> And on running this
>>>
>>> $ sudo cu -l /dev/ttyUSB1 -s 115200
>>>
>>> I get a connected message but no further progress is done. When i
>>> press Power button briefly, no activity is shown. I have tried with two
>>> phones but no success on any. I have checked the connectivity between
>>> headphone jack and USB serial chip via voltmeter, it is fine as well. Also
>>> tried by doing Master reset on phone but no use. What can be issue and how
>>> can i fix it. ?
>>>
>>> Kindly ignore any mistakes, i am new to this domain, couldn't find
>>> much help on google as well :(
>>>
>>> [1]
>>> https://osmocom.org/projects/baseband/wiki/Software_Getting_Started
>>> https://osmocom.org/projects/baseband/wiki/Osmocon
>>>
>>> [2]
>>> http://www.linuxx.eu/2014/09/osmocombb-hardware-and-software
>>> -setup.html
>>>
>>> [2]
>>>
>>>
>>
>
5 Jun
5 Jun
9:33 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
Thanks for responding Anton. I have attached putty output in email.
9:36 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
You should not put images to maillists.
And you didn't respond all other questions :)
Please attach minicom output in text form here.
And tell us which USB-TTL converter do you use.
What is the chip?
KR,
Anton
2017-06-05 10:33 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
Thanks for responding Anton. I have attached putty
output in email.
9:50 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
My USB-TTL is
*CP2102 MODULES USB TO TTL.*My putty output is this.. I could't copy the
text, therefore i attached the image.
*▒r▒▒}▒Q▒Q :M▒▒▒▒r▒▒}▒Q▒Q*
This alien-language text comes when i briefly press the power button.
I have also tried using -m c123 but it is not working.
On Mon, Jun 5, 2017 at 12:36 PM, Anton Gorbachev <antgorka(a)gmail.com> wrote:
You should not put images to maillists.
And you didn't respond all other questions :)
Please attach minicom output in text form here.
And tell us which USB-TTL converter do you use.
What is the chip?
KR,
Anton
2017-06-05 10:33 GMT+03:00 baymax Robo <baymax254(a)gmail.com>om>:
Thanks for responding Anton. I have attached
putty output in email.
10:48 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
Does the phone have any operator branding by any chance ? like
tracphone or other stuff that's not motorola ?
Cheers,
Sylvain
6 Jun
6 Jun
5:24 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
No the phone has no operator branding.
On Mon, Jun 5, 2017 at 1:48 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Does the phone have any operator branding by any
chance ? like
tracphone or other stuff that's not motorola ?
Cheers,
Sylvain
7 Jun
7 Jun
8:34 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
Hi, just found out this while surfing. It can be the problem of voltage,
but when i checked via voltmeter; the voltage were as required i-e approx
3.3Volts.
What can be other possible causes??
On Tue, Jun 6, 2017 at 8:24 AM, baymax Robo <baymax254(a)gmail.com> wrote:
No the phone has no operator branding.
On Mon, Jun 5, 2017 at 1:48 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Does the phone have any operator branding by any
chance ? like
tracphone or other stuff that's not motorola ?
Cheers,
Sylvain
12 Jul
12 Jul
8:33 a.m.
New subject: Couldn't get connectivity to Motorolla c118 on writing osmocombb
Hi,
Instead of making a cable with USB TTL chip and other stuff, i bought a
cable ( CP2102 to 2.5mm jack) from AliExpress [1] . But it's not working
still. Now I cannot see anything in cu output or in putty ssh client, means
showing no signalling between phone and my pc via data cable. What is the
reason?
Is there anyone out there, that has successfully done this osmocombb stuff
recently. I need help!
[1]
https://www.aliexpress.com/item/CP2102-ZT232-usb-uart-RS232-level-to-2-5mm-…
Thanks.
On Wed, Jun 7, 2017 at 11:34 AM, baymax Robo <baymax254(a)gmail.com> wrote:
Hi, just found out this while surfing. It can be the
problem of voltage,
but when i checked via voltmeter; the voltage were as required i-e approx
3.3Volts.
What can be other possible causes??
On Tue, Jun 6, 2017 at 8:24 AM, baymax Robo <baymax254(a)gmail.com> wrote:
No the phone has no operator branding.
On Mon, Jun 5, 2017 at 1:48 PM, Sylvain Munaut <246tnt(a)gmail.com> wrote:
Does the phone have any operator branding by any
chance ? like
tracphone or other stuff that's not motorola ?
Cheers,
Sylvain
2489
days inactive
2526
days old
baseband-devel@lists.osmocom.org
7 comments
3 participants
participants (3)
-
Anton Gorbachev -
baymax Robo -
Sylvain Munaut