19 Nov
2010
19 Nov
'10
11:15 a.m.
As none of my projects is complete without wireshark
integration,
SIMtrace abuses the GSMTAP format to feed messages into wireshark. A
simplistic wireshark dissector for the GSM TS 11.11 APDUs is included,
and it is expected to become much more complete in the fuutre (USIM
support,
parsing of file contents, etc.)
hi laforge,
cool project!
i think it can be usefull to debugging the sim client/reader of
osmocom-bb. as DATA_IND/DATA_REQ is already tapped at
layer23/src/common/l1ctl.c, it would be cool if SIM_IND/SIM_REQ will be
tapped for wireshark too.
regards,
andreas
19 Nov
19 Nov
4:54 p.m.
New subject: Announcing Osmocom SIMtrace
interesting idea, andreas.
i think it should be pretty easy: simply generate GSMTAP_TYpE_SIM messages, the new type
is defined in gsmtap.h of current libosmocore.git
--
Sent from a mobile device, excuse my short response
5:04 p.m.
New subject: Announcing Osmocom SIMtrace
Hello,
I'm wondering about the hardware.
here, we have an open pcd board.
Can't we use some free gpio lines on this device, reprogram the cpu, and get
it going?
We have some correct card connectors, too, so if that's just a matter of
soldering some wires on the openpcd board, I'd be happy to test that !
Regards
Sebastien
On Fri, Nov 19, 2010 at 4:54 PM, Harald Welte <laforge(a)gnumonks.org> wrote:
interesting idea, andreas.
i think it should be pretty easy: simply generate GSMTAP_TYpE_SIM messages,
the new type is defined in gsmtap.h of current libosmocore.git
--
Sent from a mobile device, excuse my short response
5:24 p.m.
New subject: Announcing Osmocom SIMtrace
you would have to check the schematics of openpcd, but i think it is not easily possible.
however, devices like the olimex sam7-h64 are inexpensive and peovida all io lines.
"Sébastien Lorquet" <squalyl(a)gmail.com> wrote:
Hello,
I'm wondering about the hardware.
here, we have an open pcd board.
Can't we use some free gpio lines on this device, reprogram the cpu,
and get
it going?
We have some correct card connectors, too, so if that's just a matter
of
soldering some wires on the openpcd board, I'd be happy to test that !
Regards
Sebastien
On Fri, Nov 19, 2010 at 4:54 PM, Harald Welte <laforge(a)gnumonks.org>
wrote:
--
Sent from a mobile device, excuse my short response
interesting idea, andreas.
i think it should be pretty easy: simply generate GSMTAP_TYpE_SIM
messages,
> the new type is defined in gsmtap.h of current libosmocore.git
> --
> Sent from a mobile device, excuse my short response
>
> 
5:34 p.m.
New subject: Announcing Osmocom SIMtrace
On Fri, Nov 19, 2010 at 5:24 PM, Harald Welte <laforge(a)gnumonks.org> wrote:
you would have to check the schematics of openpcd, but
i think it is not easily possible.
however, devices like the olimex sam7-h64 are inexpensive and peovida all io lines.
Would be there a difference in FW to be used for this board (as I
understand current implementation is SAM7-P64) ?
BR,
Drasko
4920
days inactive
4920
days old
baseband-devel@lists.osmocom.org
4 comments
4 participants
participants (4)
-
Andreas.Eversberg -
Drasko DRASKOVIC -
Harald Welte -
Sébastien Lorquet