Hello, I am using a C115 with a t191 cable. We have completed the "Getting Started" steps and have compiled all the necessary code. I are currently trying to run osmocon to download code onto the phone. The following output appears when we run the script: bruceb@ubuntu:~/osmocom-bb/src/host/osmocon$ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin got 1 bytes from modem, data looks like: 2d - got 1 bytes from modem, data looks like: 34 4 got 1 bytes from modem, data looks like: 29 ) got 1 bytes from modem, data looks like: 28 ( got 1 bytes from modem, data looks like: 32 2 got 1 bytes from modem, data looks like: 39 9 got 1 bytes from modem, data looks like: 30 0 got 1 bytes from modem, data looks like: 20 got 1 bytes from modem, data looks like: 2d - got 1 bytes from modem, data looks like: 34 4 got 1 bytes from modem, data looks like: 29 ) got 1 bytes from modem, data looks like: 0a . got 1 bytes from modem, data looks like: 0d . got 1 bytes from modem, data looks like: 02 . These lines continue and no script indicates anything is being downloaded, as shown on the wiki site. I have unlocked the phone and put it in "earphone" mode beforehand. I have also tried to press the power button as directed to. Are there any suggestions on how to fix this problem? Thank you, Bryan Bruce