9 Jun
2010
9 Jun
'10
10:51 a.m.
Hi all,
can anybody point be to the SIM card driver sources ?
I looked at src/target/firmware/calypso but did not find it...
Is there some other sources that you know for SCI (Smart Card
Interface) that I can look at ?
Best regards,
Drasko
---------- Forwarded message ----------
From: Wolfgang Draxinger <wdraxinger.maillist(a)draxit.de>
Date: Wed, Jun 9, 2010 at 10:08 AM
Subject: Re: SIM card driver
To: hardware(a)lists.openmoko.org, Al Johnson <openmoko(a)mazikeen.demon.co.uk>
On Wed, 9 Jun 2010 00:04:07 +0200
Drasko DRASKOVIC <drasko.draskovic(a)gmail.com> wrote:
Very uncool :(.
I need to write a driver for ARM PrimeCell Smart Card Interface PL131
in order to init/read/write SIM card for 4G mobile device. Does
anybody knows where I can get hold of some implementation of (any) SIM
interface driver ?
Thanks and BR,
Drasko
SIMs, like any other SmartCard communicate over an interface very
similar to I2C, with the notable difference, that the terminal always
is the "bus" master.
Building your very own SmartCard terminal is very easy. Or you just use
one of the ready to use ones (from Towitoko, Reiner SCT, etc.).
Also have a look in the Open Baseband project
http://bb.osmocom.org/trac/
Which b nature also must deal with SIM cards.
Wolfgang
_______________________________________________
hardware mailing list
hardware(a)lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/hardware
9 Jun
9 Jun
12:25 p.m.
Hi Drasko
Hi all,
can anybody point be to the SIM card driver sources ?
I looked at src/target/firmware/calypso but did not find it...
I did not commit my work yet because its not finished. The driver works
basicly, but is unfinished yet. Sorry folks. I am very busy but i did
not forget about the driver. How urgent do you need a well working
driver? Maybe i can sacrifice my weekend for this... Then you should be
able to communicate with the SIM on APDU level.
Is there some other sources that you know for SCI
(Smart Card
Interface) that I can look at ?
For the calypso iota you might want to have a look at the TSM-30 Sources.
Are you familliar with GSM 11.11 and the T=0 protocol?
regards
Philipp
11 Jun
11 Jun
11:52 a.m.
On Wed, Jun 9, 2010 at 12:25 PM, dexter <zero-kelvin(a)gmx.de> wrote:
Where
exactly can I find these ? Are they in the osmocom tree ?
Can you please send me link to the TSM-30 sources ?
Hi Drasko
Hi Dexter,
I do not this driver urgently. I just wanted to see the implementation
because I have to write one SIM Controller driver myself.
Maybe you can send me the sources as they are at this moment, even if
they do not compile.
Also, you can send me/point me to the manual containing adequate
programmers model, so I can work also on your driver, while I have to
work on mine anyway.
I guess one time I figure out how it works, things should be pretty similar...
Hi all,
can anybody point be to the SIM card driver sources ?
I looked at src/target/firmware/calypso but did not find it...
I did not commit my work yet because its not finished. The driver works
basicly, but is unfinished yet. Sorry folks. I am very busy but i did not
forget about the driver. How urgent do you need a well working driver? Maybe
i can sacrifice my weekend for this... Then you should be able to
communicate with the SIM on APDU level. Is there some
other sources that you know for SCI (Smart Card
Interface) that I can look at ?
For the calypso iota you might want to have a look at the TSM-30 Sources.
Are you familliar with GSM 11.11 and the T=0 protocol?
Yes.
Best regards,
Drasko
5077
days inactive
5079
days old
baseband-devel@lists.osmocom.org
2 comments
2 participants
participants (2)
-
dexter -
Drasko DRASKOVIC