Hi!
So, I decide to play with my G2 SciPhone
(My phone has configuration as follows: 512Mb (64MB) NAND + 32MB RAM)
But I could not run U-Boot...
The first step seems to be good. I run Osmocon and download "loader" to the
phone.
I got "Running on mt62xx in environment mtkram HW_CODE = 0x6235" message.
After executing $ ./osmoload memload 0x500000 u-boot.bin
I can see progress and successfull download of u-boot.bin
First of all I tried to use u-boot from here
http://downloads.qi-hardware.com/people/marcin/g2_uboot.bin
(
http://downloads.qi-hardware.com/people/marcin/g2_uboot.bin)
Executing $ ./osmoload jump 0x500000 leads to... nothing. I can see black screen.
That's all.
Also I compilled u-boot from git using toolchain kindly given by Andrew :-)
$ ./osmoload jump 0x500000 leads to gray screen after flashing white for a moment.
It looks like wrong LCD controller or driver.
So... The simple question. What I am doing wrong? :)