On Mon, Jan 17, 2011 at 03:23:13PM +0100, Dario Lombardo wrote:
Hello everybody
I'm trying to run the "mobile" application on a C115 and a C118
phone. I want to use the real sim, so I used "sim reader" in the
config. Both phones have the same behaviour:
<000e> sim.c:1206 init SIM client
<0005> gsm48_cc.c:61 init Call Control
<0001> gsm48_rr.c:4944 init Radio Ressource process
<0004> gsm48_mm.c:1220 init Mobility Management process
<0004> gsm48_mm.c:971 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:3471 init PLMN process
<0003> gsm322.c:3472 init Cell Selection process
Mobile '1' initialized, please start phone now!
VTY available on port 4247.
<0004> subscriber.c:556 Requesting SIM file 0x2fe2
<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000e> sim.c:697 go MF
<000e> sim.c:241 SELECT (file=0x3f00)
<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)
no more output beyond this point.
Phones work correctly with other softwares, sim works correctly. I
get no response from the sim. Is the card reader working on these
phones? If yes, does anyone have suggestions to solve this issue?
Are you using sylvain/testing branch from git?
I did test (with success) sim with same two phones, and collected some
useful hints about configuration at:
http://blog.rot13.org/2011/01/osmocom-bb_-_free_software_finally_comes_to_g…
(please note recommendation to use gnu-arm cross compiler!)
--
Dobrica Pavlinusic 2share!2flame dpavlin(a)rot13.org
Unix addict. Internet consultant.
http://www.rot13.org/~dpavlin