Hello.
I've updated & rebuilt osmocom and now I can't use osmocon on gta02 anymore
:(
Previously I started it like:
./osmocon -i 13 -m romload -p /dev/ttySAC0 layer1.highram.bin
power-cycle modem and it started to load firmware.
However with recent version firmware is loaded even without power-cycle!
When I use hello_world.highram.bin I got exactly the same output as before.
But when I use layer1.highram.bin I have problems running
osmoload -l /tmp/loader ping
Query timed out.
What went wrong and how do I fix it?
best regards,
Max.
Show replies by date
I just realized that it looks like I just unable to power-down modem on shr:
# echo 0> /sys/bus/platform/devices/gta02-pm-gsm.0/power_on
# cat /sys/bus/platform/devices/gta02-pm-gsm.0/power_on
1
I'm not sure if it's really so and how can I fix this...
Here is the dump I got with compal_dsp_dump.highram.bin payload:
OSMOCOM Compal DSP Dumper (revision osmocon_v0.0.0-780-gb7a4d8d-modified)
======================================================================
Device ID code: 0xb496
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: e4942706e4949b52
======================================================================
Assert DSP into Reset
Releasing DSP from Reset
DSP bootloader version 0x0100
DSP dump: Registers [00000-0005f]
00000 : fe77 0008 0008 0008 8030 8030 181f 2900 0000 0000 0000 0060 0000 0000 0000 f45f
00010 : 73be 005f 0813 0014 0003 0014 dff2 ff8e 1100 feff dee3 0000 1fd5 ffa8 0000 0000
Btw, where can I get documentation which will help to interpret those values properly?
looking forward for your advice,
Max.
False alarm - mistake on my part: not all modem-related services were disabled.
Problem solved, wiki updated.
sorry for all the fuzz,
Max.