This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
robert robert.steve07 at gmail.comThe problem is that I didn’t find the required file “loader.e88loader.bin”. Should I use another branch for this purpose? Also I think that I already bricked my C118. Best regards, Robert, On Feb 29, 2016, at 2:43 PM, Craig Comstock <craig_comstock at yahoo.com> wrote: > As Sylvain said you probably want to use quite a bit of caution to not brick phones. That said, I added some changes a while ago locally (not in the repo) to flash my c139 phone and haven't gotten any bricks yet (cross fingers). I was working on getting nuttx-bb flashed as a sole app on the phone, debugging startup problems and re-flashing repeatedly. > > YMMV of course. > > I don't think my changes are terribly interesting but can dig them up if you get stuck. > > Probably you need to add some memory config and build targets to make the loader for e88? That is similar to some of my changes. > > Craig > > > On February 29, 2016 6:19:35 AM CST, Sylvain Munaut <246tnt at gmail.com> wrote: > Can someone confirm if the steps described in > http://bb.osmocom.org/trac/wiki/flashing are still valid, as I can’t find > “loader.e88loader.bin”. I’m using sylvain/testing branch. > > Probably not. > > And unless you know how to recover things with JTAG or have a lot of > spare phones and you're ready to brick a bunch of them, I wouldn't > even attempt flashing. > > Both the code and the instructions related to it are pretty much > unmaintained / untested and use at your own risk. > > > Cheers, > > Sylvain > > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160229/0ae2f493/attachment.htm>