flashing firmware

Craig Comstock craig_comstock at yahoo.com
Mon Feb 29 12:58:47 UTC 2016


I'll take a look at my code. Can you send a log of any data you get over the serial port when you turn on the phone? What makes you think you bricked the phone? What steps did you take and at which point did you think the phone was bricked? 

On February 29, 2016 6:48:04 AM CST, robert <robert.steve07 at gmail.com> wrote:
>The problem is that I didn’t find the required file
>“loader.e88loader.bin”. Should I use another branch for this purpose?
>Also I think that I already bricked my C118.
>
>
>Best regards,
>Robert,
>
>
>
>On Feb 29, 2016, at 2:43 PM, Craig Comstock <craig_comstock at yahoo.com>
>wrote:
>
>> As Sylvain said you probably want to use quite a bit of caution to
>not brick phones. That said, I added some changes a while ago locally
>(not in the repo) to flash my c139 phone and haven't gotten any bricks
>yet (cross fingers). I was working on getting nuttx-bb flashed as a
>sole app on the phone, debugging startup problems and re-flashing
>repeatedly.
>> 
>> YMMV of course.
>> 
>> I don't think my changes are terribly interesting but can dig them up
>if you get stuck.
>> 
>> Probably you need to add some memory config and build targets to make
>the loader for e88? That is similar to some of my changes.
>> 
>> Craig
>> 
>> 
>> On February 29, 2016 6:19:35 AM CST, Sylvain Munaut
><246tnt at gmail.com> wrote:
>>  Can someone confirm if the steps described in
>>  http://bb.osmocom.org/trac/wiki/flashing are still valid, as I can’t
>find
>>  “loader.e88loader.bin”. I’m using sylvain/testing branch.
>> 
>> Probably not.
>> 
>> And unless you know how to recover things with JTAG or have a lot of
>> spare phones and you're ready to brick a bunch of them, I wouldn't
>> even attempt flashing.
>> 
>> Both the code and the instructions related to it are pretty much
>> unmaintained / untested and use at your own risk.
>> 
>> 
>> Cheers,
>> 
>>    Sylvain
>> 
>> -- 
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160229/b3e88ff8/attachment-0001.html>


More information about the baseband-devel mailing list