This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Craig Comstock craig_comstock at yahoo.comAs Sylvain said you probably want to use quite a bit of caution to not brick phones. That said, I added some changes a while ago locally (not in the repo) to flash my c139 phone and haven't gotten any bricks yet (cross fingers). I was working on getting nuttx-bb flashed as a sole app on the phone, debugging startup problems and re-flashing repeatedly. YMMV of course. I don't think my changes are terribly interesting but can dig them up if you get stuck. Probably you need to add some memory config and build targets to make the loader for e88? That is similar to some of my changes. Craig On February 29, 2016 6:19:35 AM CST, Sylvain Munaut <246tnt at gmail.com> wrote: >> Can someone confirm if the steps described in >> http://bb.osmocom.org/trac/wiki/flashing are still valid, as I can’t >find >> “loader.e88loader.bin”. I’m using sylvain/testing branch. > >Probably not. > >And unless you know how to recover things with JTAG or have a lot of >spare phones and you're ready to brick a bunch of them, I wouldn't >even attempt flashing. > >Both the code and the instructions related to it are pretty much >unmaintained / untested and use at your own risk. > > >Cheers, > > Sylvain -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160229/c54bed4f/attachment.htm>