This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Tomcsányi Domonkos domi at tomcsanyi.netHi Mirko, This wiki page contains all the info necessary, I was able to get it going just going through this step by step: http://openbsc.osmocom.org/trac/wiki/SDR_OsmoTRX_network_from_scratch Cheers, Domi > 2016. febr. 22. dátummal, 23:58 időpontban Mirko Kovacevic <northmirko at gmail.com> írta: > > Hi, > > Can we still use osmocomBB phones (C140,C139..) with Osmo-BTS project? > > I use transceiver program from jolly/testing branch and > firmware in compal_86 ( trx.highram.bin ) from sylvian/testing branch, > all from osmocomBB. > > It is the only way to get phones start sync on particular arfcn. > > If I write this configuration in osmo-bts.cfg: > > ! > ! OsmoBTS () configuration saved from vty > !! > ! > log stderr > logging color 0 > logging timestamp 0 > logging level all everything > logging level rsl info > logging level oml info > logging level rll notice > logging level rr notice > logging level meas notice > logging level pag info > logging level l1c info > logging level l1p info > logging level dsp debug > logging level abis notice > ! > line vty > no login > ! > phy 0 > instance 0 > bts 0 > band 900 > ipa unit-id 1801 0 > oml remote-ip 127.0.0.1 > trx 0 > phy 0 instance 0 > > > > I can make launch osmo-bts-trx program. > > After launching osmo-nitb, Osmo-BTS is writing this log: > > <000b> trx_if.c:379 transceiver (phy0.0) rejected TRX command with response: 'RSP POWERON -22' > <0001> bts.c:203 Shutting down BTS 0, Reason SIGINT > > and when shutdown timer is elapsed, Osmo-BTS exit writing this log: > > Shutdown timer expired. > > What should I put into osmo-bts.cfg and openbsc.cfg to make thing work ? > > I know that Calypso BTS support only one timeslot. > Tried to modify openbsc.cfg to support only one TS, by putting: > > timeslot 0 > phys_chan_config CCCH+SDCCH4 > timeslot 1 > phys_chan_config NONE > timeslot 2 > phys_chan_config NONE > timeslot 3 > phys_chan_config NONE > timeslot 4 > phys_chan_config NONE > timeslot 5 > phys_chan_config NONE > timeslot 6 > phys_chan_config NONE > timeslot 7 > phys_chan_config NONE > > But BSC is compling with this configuration. > > Thanks in advance > > > > -- > Puno pozdrava, > Mirko Kovačević > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20160223/7084a433/attachment.htm>