This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Sylvain Munaut 246tnt at gmail.comHi, > Solved the issue. Using the chainloading flag did the magic. Thanks > Sylvain Munaut. For future references, this can work, if you bump into same > error (I think even the cable in use can affect the transfer) > >> ./osmocon -p /dev/ttyUSB0 -m c123xor -c >> ../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin Are you sure you used the compalram.bin ? I seem to remember that chainloading requires the .highram.bin version. Cheers, Sylvain