Error loading firmware onto Motorola C115.

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.

Ravi Sharan ravisharan at iith.ac.in
Wed Jul 30 08:35:00 UTC 2014


Hi,
    Yes, its FIRMWARE.highram.bin, not .compalram.bin.

Ravi


On Wed, Jul 30, 2014 at 1:52 PM, Sylvain Munaut <246tnt at gmail.com> wrote:

> Hi,
>
> >          Solved the issue. Using the chainloading flag did the magic.
> Thanks
> > Sylvain Munaut. For future references, this can work, if you bump into
> same
> > error (I think even the cable in use can affect the transfer)
> >
> >> ./osmocon -p /dev/ttyUSB0 -m c123xor -c
> >> ../../target/firmware/board/compal_exx/FIRMWARE.compalram.bin
>
>
> Are you sure you used the compalram.bin ?  I seem to remember that
> chainloading requires the .highram.bin version.
>
> Cheers,
>
>     Sylvain
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20140730/485b5ed9/attachment.htm>


More information about the baseband-devel mailing list