doesn't get output from osmocon

ml at mail.tsaitgaist.info ml at mail.tsaitgaist.info
Sat Jan 29 08:34:32 UTC 2011


they're the right cables.
ignore the pictures, only the name is important.
these are some cheap websites, don't expect good quality content.

kevin

On 01/29/2011 03:34 AM, Tobias Funke wrote:
> thanks to you,
> 
> i checked that:
> 
> there is no input in osmocon, when i rub the tip, so i think the cable is shit.
> 
> that was simple...
> 
> i buy a new one, are the akku-king cable and the gsmlibery cable
> really the right ones???
> 
> both pictures are showing not the t191 unlock cable...
> 
> good greetings
> tobsen
> 
> 
> 
> 2011/1/28  <ml at mail.tsaitgaist.info>:
>> Hi,
>>
>> first test if the cable is working. a fast but dirty way is to rub the
>> tip with your fingers. this generates noise that should show some random
>> input in osmocon.
>> also but sure to not charge the phone while using osmocon, this can
>> inhibit the ram loader.
>>
>> good luck,
>> kevin
>>
>> On 01/28/2011 08:09 PM, tobsen wrote:
>>>
>>> Hi,
>>>
>>> sorry if I shouldn`t write correclly, i`m not that good in english.
>>>
>>> i have a Motorola c118 and this usb/serial cable:
>>> http://www.gsmbase.de/shop/show_product.php?products_id=620 here
>>>
>>> my problem:
>>> compiling was successfully.
>>>
>>> than i run osmocon:
>>> ./osmocon -p /dev/ttyUSB0 -m c123xor
>>> /home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
>>>
>>> i pressed power on the phone.
>>> nothing happend.
>>> again.
>>> nothing happend, no output, no upload/download to/from the phone...
>>>
>>> what is my fault? can you help me?
>>>
>>> i have tested it with:  -m 123 ; -m 118xor ; -m 118 (the same thing)
>>> my system is ubuntu 10.10 (not in a virtual box or something else).
>>>
>>>
>>> thanks a lot,
>>> tobsen
>>>
>>
>>
> 
> 




More information about the baseband-devel mailing list