doesn't get output from osmocon

Tobias Funke torfun at web.de
Sat Jan 29 02:34:28 UTC 2011


thanks to you,

i checked that:

there is no input in osmocon, when i rub the tip, so i think the cable is shit.

that was simple...

i buy a new one, are the akku-king cable and the gsmlibery cable
really the right ones???

both pictures are showing not the t191 unlock cable...

good greetings
tobsen



2011/1/28  <ml at mail.tsaitgaist.info>:
> Hi,
>
> first test if the cable is working. a fast but dirty way is to rub the
> tip with your fingers. this generates noise that should show some random
> input in osmocon.
> also but sure to not charge the phone while using osmocon, this can
> inhibit the ram loader.
>
> good luck,
> kevin
>
> On 01/28/2011 08:09 PM, tobsen wrote:
>>
>> Hi,
>>
>> sorry if I shouldn`t write correclly, i`m not that good in english.
>>
>> i have a Motorola c118 and this usb/serial cable:
>> http://www.gsmbase.de/shop/show_product.php?products_id=620 here
>>
>> my problem:
>> compiling was successfully.
>>
>> than i run osmocon:
>> ./osmocon -p /dev/ttyUSB0 -m c123xor
>> /home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin
>>
>> i pressed power on the phone.
>> nothing happend.
>> again.
>> nothing happend, no output, no upload/download to/from the phone...
>>
>> what is my fault? can you help me?
>>
>> i have tested it with:  -m 123 ; -m 118xor ; -m 118 (the same thing)
>> my system is ubuntu 10.10 (not in a virtual box or something else).
>>
>>
>> thanks a lot,
>> tobsen
>>
>
>




More information about the baseband-devel mailing list