This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Tobias Funke tobiasfunke93 at googlemail.comthank you for helping me, kevin. tobsen 2011/1/29 <ml at mail.tsaitgaist.info>: > they're the right cables. > ignore the pictures, only the name is important. > these are some cheap websites, don't expect good quality content. > > kevin > > On 01/29/2011 03:34 AM, Tobias Funke wrote: >> thanks to you, >> >> i checked that: >> >> there is no input in osmocon, when i rub the tip, so i think the cable is shit. >> >> that was simple... >> >> i buy a new one, are the akku-king cable and the gsmlibery cable >> really the right ones??? >> >> both pictures are showing not the t191 unlock cable... >> >> good greetings >> tobsen >> >> >> >> 2011/1/28 <ml at mail.tsaitgaist.info>: >>> Hi, >>> >>> first test if the cable is working. a fast but dirty way is to rub the >>> tip with your fingers. this generates noise that should show some random >>> input in osmocon. >>> also but sure to not charge the phone while using osmocon, this can >>> inhibit the ram loader. >>> >>> good luck, >>> kevin >>> >>> On 01/28/2011 08:09 PM, tobsen wrote: >>>> >>>> Hi, >>>> >>>> sorry if I shouldn`t write correclly, i`m not that good in english. >>>> >>>> i have a Motorola c118 and this usb/serial cable: >>>> http://www.gsmbase.de/shop/show_product.php?products_id=620 here >>>> >>>> my problem: >>>> compiling was successfully. >>>> >>>> than i run osmocon: >>>> ./osmocon -p /dev/ttyUSB0 -m c123xor >>>> /home/test/install/osmocom-bb/src/target/firmware/board/compal_e88/layer1.ramload.bin >>>> >>>> i pressed power on the phone. >>>> nothing happend. >>>> again. >>>> nothing happend, no output, no upload/download to/from the phone... >>>> >>>> what is my fault? can you help me? >>>> >>>> i have tested it with: -m 123 ; -m 118xor ; -m 118 (the same thing) >>>> my system is ubuntu 10.10 (not in a virtual box or something else). >>>> >>>> >>>> thanks a lot, >>>> tobsen >>>> >>> >>> >> >> > >