This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Neels Hofmeyr nhofmeyr at sysmocom.deOn Sun, Jan 14, 2018 at 03:15:59PM +0000, Sandi Suhendro wrote: > now the auto create subscriber not working which is Im looking and its very > good and nice improovement. To reiterate, in the old osmo-nitb, we used to have 'subscriber-create-on-demand', which the new osmo-hlr does not support. It's not an improvement, it's dropping a feature on the floor. > does my setting for the osmocom stacks is right with this? : > > osmo-bsc -c ~/osmo/osmo-bsc.cfg > osmo-hlr -l hlr.db -c ~/osmo/osmo-hlr.cfg > osmo-stp -c ~/osmo/osmo-stp.cfg > osmo-mgw -c ~/osmo/osmo-mgw-for-msc.cfg > osmo-mgw -c ~/osmo/osmo-mgw-for-bsc.cfg > osmo-msc -c ~/osmo/osmo-msc.cfg > > DId I miss something? Im sure I miss something. :-) looks good as long as you also have a BTS. Of course just the invocation commands don't convey anything about the settings. And of course don't make us read your config unless you have an actual problem. > and how to connect osmo-msc with asterisk? The short answer is: use osmo-sip-connector. The long answer should be somewhere on the wiki, but personally I'm not familiar with that. Maybe someone else has a pointer? ~N -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20180115/744b7e85/attachment.bin>