This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sandi Suhendro djks74 at gmail.comHi all, The BTS work with Sylvain/testing now, but not with jolly/testing branch. strange! regards, Sandi On Mon, Nov 27, 2017 at 8:06 PM, Sandi Suhendro <djks74 at gmail.com> wrote: > Dear Neels, Vadim, > I tried the osmocomBB with my C118 also C117, and I install gnuarm and > osmocomBB with sylvain and jolly to try both. > seems the configuration is fine, but i have problem on the osmocombb > tranceiver. > my problem is : > > here are the log output from my transceiver : > https://pastebin.com/8Y1qXWh8 > > then my osmonitb seems not moving cause transceiver not sync as I > presumed: (its working for the configuration) > https://pastebin.com/5wPhePfT > > also my osmo-bts stuck since its not sync with transceiver I guess : > https://pastebin.com/T2s8GJ7e > > this is the tcpdump for osmocombb with osmonitb: > https://wsi.li/1c4JhMOIUqOk/746634 > > > > THEN... > I also tried with openbts, and the transceiver was terminated after I > start ./transceiver -a 51 -r 99. > here are the tcpdump with openbts, seems problem is from the transceiver? > https://wsi.li/huJmuT6TSh3o/746634 > > so... > hope you guys the problem from the indication I have? > > Thanks in advance. > > regards, > Sandi > > > > On Mon, Nov 27, 2017 at 7:13 PM, Neels Hofmeyr <nhofmeyr at sysmocom.de> > wrote: > >> On Fri, Nov 24, 2017 at 06:04:10PM +0300, GSK MOSS wrote: >> > * Invalid condition detected: Frame difference is 1685248-0 > 1* >> >> I'm not 100% sure but I think this is just some startup condition that >> you can >> safely ignore. >> >> > Reading config failed. >> > Exiting. >> >> those usually also output why reading the config failed. >> Do you get a more detailed error message? >> >> I took your attached openbsc.cfg and successfully started osmo-nitb with >> it, so >> maybe you just messed up the config name or something so that osmo-nitb >> *can't >> find* your file? >> >> > May be the problem is in *"*hlr.sqlite3"? I don't know. >> >> Ususally that wouldn't result in "reading config failed". The db file is >> hardly >> ever the problem though, I wouldn't think it is in your case either. >> >> If you want a new db file, simply move it out of the way / rename it / >> delete >> it, and osmo-nitb will create a fresh empty one automatically. After that >> you >> can use the telnet VTY to add subscribers again. >> >> >> A general remark: it would be appreciated if you sent mails to this list >> not in >> HTML format, but just in plain text. We read mails in plain text, and >> your line >> breaks are messed up because you're sending in HTML. Thanks! >> >> ~N >> > > > > -- > best regards, > Krazy Sandi > Blue Soho Recordings > Number One Recordings > -- best regards, Krazy Sandi Blue Soho Recordings Number One Recordings -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20171127/1f1de565/attachment.htm>