This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
GSK MOSS gskmoss at gmail.comHello guys! I inited bsc and bts сfg succesfuly, but I got a problem. <0004> abis_rsl.c:1922 (bts=0,trx=0,ts=2,ss=0) Activating ARFCN(60) SS(0) lctype TCH_F r=OTHER ra=0x57 ta=38 <0004> abis_rsl.c:595 (bts=0,trx=0,ts=2,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL <0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state NONE -> ACTIVATION REQUESTED <0004> abis_rsl.c:1603 (bts=0,trx=0,ts=2,ss=0) CHANNEL ACTIVATE ACK <0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state ACTIVATION REQUESTED -> ACTIVE <0004> abis_rsl.c:1721 (bts=0,trx=0,ts=2,ss=0) T3101 expired: no response to IMMEDIATE ASSIGN <0004> abis_rsl.c:867 (bts=0,trx=0,ts=2,ss=0) RF Channel Release due to error: 1 <0004> abis_rsl.c:777 (bts=0,trx=0,ts=2,ss=0) DEACTivate SACCH CMD <0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state ACTIVE -> RELEASE DUE ERROR <0004> abis_rsl.c:939 (bts=0,trx=0,ts=2,ss=0) RF CHANNEL RELEASE ACK <0004> abis_rsl.c:826 (bts=0,trx=0,ts=2,ss=0) is back in operation. What's wrong? Full log files attached. 2017-11-28 2:20 GMT+03:00 Vadim Yanitskiy <axilirator at gmail.com>: > Hi Sandi, > > > here are the log output from my transceiver : > > https://pastebin.com/8Y1qXWh8 > > According to the attached log, you don't have any clock indications... > > > sudo ./transceiver -a 51 -r 99 > > ... > > <0011> trx.c:365 Setting C0 ARFCN to 51 (GSM900) > > Please read the wiki carefully! You are doing wrong. > What are you expecting here? Please refer: > > http://osmocom.org/projects/baseband/wiki/CalypsoBTS#Clock-source > > > use RSSI or cell_log applications to find cells with good > > signal and remember the ARFCN numbers. One of them will be > > used as a clock source for our own base station. > > http://osmocom.org/projects/baseband/wiki/CalypsoBTS# > OsmoNITB-configuration > > > Channel configuration > > > > Set a proper ARFCN for running BTS (don't confuse with > > a clock source). Also, set a corresponding band name. > > The AFRCN value, passed to the OsmocomBB transceiver, is a > channel of the clock reference cell. The AFRCN value specified > in the OsmoNiTB configuration is a C0 channel of the BTS you > are going to run. Don't confuse them please. > > > I also tried with openbts, and the transceiver was terminated > > after I start ./transceiver -a 51 -r 99. > > Again, read the wiki: > > http://osmocom.org/projects/baseband/wiki/CalypsoBTS# > CalypsoBTS-with-OpenBTS > > > Run the TRX firmware on the phone as described above. No need to > > start transceiver, OpenBTS will run it automatically. > > > > The BTS work with Sylvain/testing now, > > but not with jolly/testing branch. > > I just tested the latest versions of OsmoNiTB & OsmoBTS. > Everything works as expected. > > > With best regards, > Vadim Yanitskiy. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20171202/b88528da/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: bsc Type: application/octet-stream Size: 13681 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20171202/b88528da/attachment.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: bts Type: application/octet-stream Size: 1576 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20171202/b88528da/attachment-0001.obj>